308 amp electrical cable

Hello friends 2009 1.6 308 I will connect the amplifier to my car but I could not find how to insert the power cable from the battery. There are no holes, could anyone using 308 help?

If you bend the gas and brake pedals there, my brother, you can pass the transition section of the cable harness that goes to the mtoro section, it will make you struggle a little bit, but make a nice clean insulation so that no water gets inside.

I looked there, but I couldn't see the harness. I wonder where it comes from in the engine section. Let me try to get it in by the engine. Could it be behind the battery?

They opened a fabricated hole in 206 to see how beautiful the amp cable pass here :)

Everyone is talking about that hole in 206. I do not know that there was no such hole. I do not know that my ban coincided :) If you do not want to pierce through the fender and there is no road, but there is a place, the most clean one is inside the engine.

In 308, the place where that cable harness passes is in a very difficult place, there is no gap in the bundle and it is necessary to drill with a drill. Even a screwdriver does not come from that tire. I even removed the battery because it was left behind, but no cable passes through that bundle. You have to find another hole. The hole in that 206 was super but I don't have a room :)

You will make a hole in a suitable place, hodja. I wish you had opened the battery while disconnected

The last time I took it somewhere in the industry, they found a hole that fits the back of the breastplate and inserted it. That hole blew me 50 TL but they did all the installation and assembly. So sometimes it is necessary to leave the job to the master :)

[QUOTE = Gboz3510] Last time I took it somewhere in the industry, they found a hole that fits the back of the breastplate and inserted it there. That hole blew me 50 TL but they did all the installation and assembly. So sometimes it is necessary to leave the job to the master:) [/ QUOTE]