|
|
|
|
308 allure smeg screen |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (After 2014) | |
| 08.05.2020 20:34 | # 1 |
 Feridunoz |
|
|
|
|
| 08.05.2020 20:34 | # 2 |
 sonerkyl |
|
|
greetings. First of all, welcome to us. I don't think it will be with the socket, it is most likely caused by parts such as the electronic resistor-capacitor inside the screen. screen goes out due to overheating but in cold weather etc. will show without problems. repair is possible, but unfortunately, not every electronics worker understands it. The service will definitely replace the new one as soon as it is repaired. If your vehicle is serviced, you can get it at an affordable price by pressing it a little.
|
|
| 08.05.2020 20:34 | # 3 |
| Feridunoz |
|
|
Thank you for your answer, Service 3600 special service 2500, ex-1500 price, I could show it to an electronics store if I could disassemble it.
|
|
| 08.05.2020 20:34 | # 4 |
| sonerkyl |
|
|
service, it seems like you will look at the most beautiful teacher who has flown from a height. good luck now, hopefully you will be resolved properly.
|
|
| 08.05.2020 20:34 | # 5 |
 cmlkrc |
|
|
Last month, I sold it to 950 TL.
|
|
| 08.05.2020 20:34 | # 6 |
| Feridunoz |
|
|
How to disassemble this screen 1 2 pounds capacitor bottom is replaced by an electronics store, anyone knows? |
|
| 08.05.2020 20:34 | # 7 |
| Jlozde |
|
|
You need "trim removal tool" that you can get from Aliexpress. Otherwise, you will probably break the plastic sockets. With the trim removal tool you bought, you can first reach the main unit by inserting the tape through a thin hole you will see inside the place where it meets the torpedo. |
|
| 08.05.2020 20:34 | # 8 |
| Feridunoz |
|
|
Thanks.
|
|