Peugeot Forums - Peugeot Fan Club

308 1.6 vti manual performance problem help

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013)
21.09.2021 23:11 # 1
Ewew
Hello friends . I have a 2012 model 1.6 vti access 308. I've used a mini with a similar engine before. The problem is that the car 1.6 has 120 horsepower, but it can reach 90 km at 2500rpm.
110 In order to go 120, it is necessary to press 3500rpm, which is just like the 1.4 engine.
Fuel consumption is 7.3 L on the long road. I'm telling you because I know the previous performance of the car and these engines, it sounds like there is a performance filter in the car, but uphill it seems like it's choking. I don't know if the pressure pad will cause this, but I check with my own experience. Oxygen sensors, timing chain changed, spark plugs filters, original coils, solid computer. There is no fault in the computer, but the car does not pull. All pejo players, including the authorized service, are staring at me blankly. As far as I can see, does the electro valve cause these things, but I would be glad if friends or experienced masters can help me

22.09.2021 11:14 # 2
muzzy35
Sir, I know that speed and revolution are directly proportional, that is, it is big enough to go with 100 at 3000 rpm, I know that even if the gears are at 1000 horsepower, the vehicle speed will be according to the gear rotation speed
Friends using the same vehicle will answer better, have a good day
23.09.2021 09:26 # 3
whisky
Yes, the pressure pad causes this. If it misses and does not fully grasp it, it has a great effect on performance.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”