|
|
|
|
308 1.6 hdi idle problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) | |
| 08.05.2020 19:29 | # 1 |
 gazneli |
|
|
With 308 I bought last month, I made a grill to the peugeot realm, I am very satisfied with my car, but after the oil change, I encountered the problem in the video, is there a simple solution to this? they say you have to leave the car when I take it to the masters. I am referring to Allah, who is taking care of him ... https://www.youtube.com/watch?v=6fbsnmwefqk |
|
| 08.05.2020 19:29 | # 2 |
 sonerkyl |
|
|
welcome to us. May your vehicle be in good luck, my Lord. it will be the socket maf sensor that your friend unscrewed in the video. Do you try to disassemble it? can. check them out.
|
|
| 08.05.2020 19:29 | # 3 |
| gazneli |
|
|
Thank you... Yes, when I remove the socket, it gets better and the idling rises like clockwork. As in the video, I disassembled the maf sensor today and cleaned it with contact spray did not benefit again ... I am sure that all these things are after maintenance. I just noticed and filmed the video of the turbo, there is white smoke coming out and it increased to 8.8 in my fuel consumption. https://www.youtube.com/watch?v=l7-tazuweg8 I think the detour appeared to me from the first month ... |
|
| 08.05.2020 19:29 | # 4 |
| sonerkyl |
|
|
teacher video in stealth mode
|
|
| 08.05.2020 19:29 | # 5 |
| sonerkyl |
|
|
I do not have much information about diesel engines, my teacher, whatever I say is a lie now, the car does not blow black smoke, right?
|
|
| 08.05.2020 19:29 | # 6 |
| gazneli |
|
|
https://www.youtube.com/watch?v=l7-tazuweg8 I'm fixing the video, sorry! no black smoke, no whistling sound, there is some work on the turbo. |
|
| 08.05.2020 19:29 | # 7 |
| sonerkyl |
|
|
My teacher came to the pregnant woman who had a leak of oil there.
|
|
| 08.05.2020 19:29 | # 8 |
| gazneli |
|
|
Thank you, Soner Bey, I hope I will not come across an artisan who said that we will stop and change the turbo. |
|
| 08.05.2020 19:29 | # 9 |
| gazneli |
|
|
https://www.youtube.com/watch?v=hpohtgbqueo I think the problem is in the exhaust connection ... can this be related to the inconsistency of the maf sensor? |
|
| 08.05.2020 19:29 | # 10 |
 ahmet_bjk |
|
|
If the white smoke is exactly where it comes from, it may also come from the connection points. |
|
| 08.05.2020 19:29 | # 11 |
| gazneli |
|
|
It comes exactly where the video is, but not in the form of a spray in the form of a smoke. Can this be the reason for knocking? |
|
| 08.05.2020 19:29 | # 12 |
| sonerkyl |
|
|
The turbo does not change, as it is, my teacher, you can easily have a control. I hope it doesn't cost you a lot.
|
|
| 08.05.2020 19:29 | # 13 |
| gazneli |
|
|
The engine misfire problem (maf) due to the air flow sensor deformed the clamp attached to the particle filter of the turbocharger in the video. I hope this helps if there are friends who have the same problem ...
|
|