![]() ![]() |
|
![]() |
308 1.6 diesel water abatement (resolved) |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 308 (2008-2013) |
08.05.2020 19:22 | # 1 |
![]() |
|
|
08.05.2020 19:22 | # 2 |
![]() |
|
friends waiting for your help. exhaust also no steam. normal in engine oil
|
08.05.2020 19:22 | # 3 |
![]() |
|
Do you use air conditioner
|
08.05.2020 19:22 | # 4 |
![]() |
|
I use
|
08.05.2020 19:22 | # 5 |
![]() |
|
Have you ever overheated the vehicle?
|
08.05.2020 19:22 | # 6 |
![]() |
|
Oguz bro, if you look at the cooling system when the engine is cold, you can look at it when it is hot.
|
08.05.2020 19:22 | # 7 |
![]() |
|
The car did not overheat, the system actually works well, usually when I always go under 90, sometimes it comes to 90 degrees and as soon as it passes, the fan steals and turns off around 80. I did the leak control when it was hot and cold. As I decrease, I will continue to use antifreeze water and add it to my mind.
|
08.05.2020 19:22 | # 8 |
![]() |
|
Well, there is a leak from a certain strong place, my focus was tasting water in the same way, but it was 2 months since it smeared from where it was, but it was missing from the connection of the cooling system, but when it stopped, it seems that it does not appear to me when the two stops, it is also dripping from the gas when it says to my friend. I couldn't see because the water was steam so I found it by chance :)
|
08.05.2020 19:22 | # 9 |
![]() |
|
As you said, thank you for your help, Soner brother, the problem is in an awful place and he has managed to make me very annoyed. then, as soon as you call a friend leak, it may be steamed as you call the gas to the car as soon as possible because there is no water under the place where I parked. I will check and write here as soon as possible and have a good day.
|
08.05.2020 19:22 | # 10 |
![]() |
|
friends we found the problem and it was repaired. The source of the problem was that the water was evaporating and disappeared before the thermostat seal missed a little, we made a good follow-up with the master, and we realized that it was from the thermostat seal, we installed a new one and the problem was solved.
|
08.05.2020 19:22 | # 11 |
![]() |
|
glad to have the problem resolved, we learned something more |