|
|
|
|
307 xt wiper water spray problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 18:33 | # 1 |
 mehmethannn |
|
|
Friends, I am not writing any details as I have introduced myself before. my name is mehmet, I'm 34 years old, I'm a banker, I live in a district of Sivas. I have a little problem. I'm waiting for your help. There is a problem where the wiper sprays water (above the hood) one side is spraying, the other is not spraying. I wonder if anyone knows how to disassemble it. I pulled a bit with my hand, but I did not force too much because I did not want to break or break it. I'm waiting for your help. thanks in advance.
|
|
| 08.05.2020 18:33 | # 2 |
| Serkan |
|
|
Teacher is dismantling from the inside of the hood
|
|
| 08.05.2020 18:33 | # 3 |
| mehmethannn |
|
|
[QUOTE = Serkan] Removed from the inside of the hood Hodja [/ QUOTE] ok serkan bey thank you very much. I try it on the weekend now ...
|
|
| 08.05.2020 18:33 | # 4 |
 ramtas |
|
|
I just inserted it. Open the hood. It comes out without breaking the hose from the bottom. Then push the sprinkler from the bottom. But instead of the sprinkler, look at the hose and connection apparatus. water atioid half of the water is on the engine. |
|
| 08.05.2020 18:33 | # 5 |
| mehmethannn |
|
|
[QUOTE = ramtas] I just inserted it. Open the hood. It comes out without breaking the hose from the bottom. Then push the sprinkler from the bottom. But instead of the sprinkler, look at the hose and connection apparatus. water atioid half of the water is on the engine. [/ QUOTE] Master, my problem is just like yours. when I run the fountain, the water comes out and flows over the hood but does not squirt. I think there is probably a leak at the end of the hose. Where can I find the apparatus you said? I need a rubber wiper. There is no part in the district where I am. Thank you for your help.
|
|
| 08.05.2020 18:33 | # 6 |
 Burak |
|
|
Someone had come to a mechanic in the same problem, the master had given the air inside the sprinkler with a compressor.
|
|
| 08.05.2020 18:33 | # 7 |
| mehmethannn |
|
|
[QUOTE = Burak] Someone came to a mechanic in the same problem, he gave air to the master fountain with the compressor, it was fixed, the problem was the same as you, one side was water atio and the other side was atiom [/ QUOTE] hello sir, I'm going out of town on the weekend for a meeting. first of all i will try it myself. I think we will take it to industry, if I can disassemble it, I think I will take care of the rest. any mechanic could look at this problem. for example electrician
 |
|
| 08.05.2020 18:33 | # 8 |
 okan77 |
|
|
After removing the hoses from the sprinkler heads on the hood, also check whether the water spout hose is working properly with the help of a person. The water can be pumped ...
|
|
| 08.05.2020 18:33 | # 9 |
| mehmethannn |
|
|
[QUOTE = okan77] After removing the hoses from the sprinkler heads on the hood, check whether the water sprinkler hose is fully functioning with the help of a person .. Water can be pumped less ... [/ QUOTE] hello sir How to remove the place on the hood, that is, the black one. I tried to pull a little bit with my hand, then I gave up so that it would break. First of all, I have something to do from the bottom of the hood. Thank you from now.
|
|