307 window water engine removal !!!

good day guys I would like to ask you for help on where and how to remove Mavisim's glass water engine. I couldn't find the subject I researched. A friend put a picture narration, but the pictures cannot be viewed. The explanations are also written according to the picture. probably the engine's outputs are blocked ...

it will be enough to separate the front side of the right front wheel hood. If there are two clasps at the front of the hood, it will be easier to remove them first, it will be easier if you break the steering to the left side. After you separate the hood, it will be visible. will come with the hose.

thank you Öndercan ...

I had to dismantle the whole of the hood, one piece, I was going to remove the engine that I realized that water was leaking from the place where the engine was installed, I think the engine had been displaced ...
I put the water outlets in water with descaling agent. . As if shaking, it was clogged in the wide outlet, I hope I left it to the solution until it clears ...

20-25 TL new ... if you can find it, just change it to avoid any problems ...

o two o two hose outlets separating carefully clean the tip inside the separator with pliers, thoroughly soiled, oiled, then reinsert