307 Window Switch Problem

Greetings.

This problem also existed in 307 of my friend. I don't know what he did right now.
Annoying troubles. I hope you will solve it cheaply at the thesis time.

307 beautiful cars, but I think they have usual problems with the interior. Horn, Cd Changer and now the glass key ... No more to say to your comfort, but let's do it. Doctor 2009-11-04 15:56:11

First of all, I want to get past, to reach the solution of the problem, the first thing you need to check is to determine if the keys are working properly, to check this, you need to disassemble the key control lever you have pictured and have the keys checked by the avometer (electric meter). the button controls will probably be out of order.

Thanks for the answer. So would it be a problem to find a properly working output?

I think it will not be a problem if you can find a clean exit, but as far as I have experienced, if the control units are not too expensive in the prices of the publishers, I will have discounts of 25% pejos in spare parts until the 21st of this month.

The same problem occurred in my friend's Skoda Fabia. He was lifting or lowering according to his head. We went to two skoda services in Ankar, both of them said the keypad was broken and made an exorbitant price, we walked in the mainland for 2 days, people either do not understand or say on the keypad. We also bought a keypad, if it works from a particle, and checked it in the repair shop next to it, but it didn't work. Finally, the friend came across an apprentice aged 15-16 (interesting, though). When the child removed the door trim, they saw that they attached the back door control unit (a small card) to the front door, went to the apprentice with the apprentice and took it up to 150 TL, everything is ok ..

If you can, open the inside of the glass key and clean the places where the coal presses with contact spray and fine sandpaper.

Get well soon

I think these were zero 170-180.

Thanks for the comments.

[QUOTE = Doctor] Thanks for the comments. [/ QUOTE]

My friend, first take out the glass control set in its slot, open the inside, test the channel channels of the programmed brain one by one. Try it but it was very difficult to work, I had the program deviated, the repair has to change very hard. Today it is 157.7 TL.

[QUOTE = Doctor] Thanks for the answer. So would it be a problem to find a properly working output? [/ QUOTE] I think don't get bought, cleaning, etc. If it doesn't save, you better get the original. You have the guarantee of the original part !!!!!!!!!!

Doctor;
It will not be much more robust than it is. I advise you to take a pencil and an eraser in your hand and you will go to repair this work that you will pay 1TL. Even if you get out, it will be the same. In the meantime, let's come to how. You will open the glass button. You will clean the card part with an eraser. then you will paint the surfaces that will touch the card on the plastic part with a pencil. and then you will replace the buttons. that's all. I did it working. Anything like a remote control works like this anyway. but if you want, I have a few spare for citroen. sleeping. i can give you for free. ie free of charge. you know, everything is money, not the purpose of the business ... or what does the forum do for everyone with money ...

Serdar brother, thank you for your interest.

Hello friends.

First of all, when the brother of the mirror control knob of my 206 was broken, it was so, this piece is united to the control panel that opens the windshields.

[QUOTE = serdarkayas] Doctor;
It will not be much more robust than it is. I advise you to take a pencil and an eraser in your hand and you will go to repair this work that you will pay 1TL. Even if you get out, it will be the same. In the meantime, let's come to how. You will open the glass button. You will clean the card part with an eraser. then you will paint the surfaces that will touch the card on the plastic part with a pencil. and then you will replace the buttons. that's all. I did it working. Anything like a remote control works like this anyway. but if you want, I have a few spare for citroen. sleeping. i can give you for free. ie free of charge. you know, everything is money, not the purpose of the business ... or what does the forum do for everyone with money ...
[/ QUOTE]

sometime I had this problem in august ... a friend bought a glass vending machine. ... We took care of putting a piece of paper between the undercarriage and the keys in a vehicle ....

The main source of this problem is that the conductive discs in plastic equipment lose their properties over time. This is a situation that will happen to all controllers in this structure sooner or later. Making the solution with a pencil will solve the job temporarily. In fact, the solution is simple. You will use carbon paint instead of a pencil. You can find carbon paint from workplaces that sell electronics (resistors, capacitors, etc.). It is generally used to repair copper paths that fail in circuits. It has a price of 5 lira. After thoroughly cleaning the circuit and the tire with cologne and degreasing from dust, carefully paint the discs on the tire with a toothpick. It dries up in 10 minutes. After drying, proceed to another layer. After that, after waiting for 2 hours to dry completely, you can collect and start using the remote. Mine has not been a problem for now.