307 trip computers

Hello, I bought the 2004 model 307 vehicle, the trip computer was not working because the tape was changed. Is there a solution for this? I request help from friends who have experience other than installing original tapes.

Even if the tape is afterwards, it has to work, at least it should show the degree or fuel consumption.

I also had a normal tape, then I turned it into double din and it is still active. If the battery or something has been removed, the computer may have been inactive. It is necessary to connect to pp2000 and activate it again, if it is. as a result, the trip computer is working even if the tape is not original.

Confirmed trip computer not connected in 2004 models

Thank you for the information you provided, the screen is working date time temperature other data is not working

To see other data, there is a button on the end of the wiper arm. You can switch between the information on the screen by pressing it .. eg .. instant consumption. Remaining fuel etc ..

I think the signal arms of the vehicle I bought are not original, there is no push button as I watched in the end parts.
How do I know if the airbags are working or not?

[QUOTE = Ertan22] I think the signal levers of the vehicle I bought are not original, there is no push button at the end as I watched in the videos
How do I know if the airbags are working? Is it necessary to have an electrician look at the airbags are intact [/ QUOTE] I think there is a trip computer that sells the vehicle, but the tape has changed, he said. If there is no button on the wiper arm end, the pp2000 means that the trip computer has never been activated. o button helps to switch between information and reset values. you need to change the handle first. then you have to connect it to the device and activate it. If the airbags do not work, the vehicle will send it as a fault code. If they passed this by erasing the malfunction, if you connect it to pp2000, it will occur. I hope you will be satisfied using it.

Com2000 trip computer key is being made, there is a topic in the forum. Unfortunately, I do not know why date, time and degree do not show.

I realized that when I was changing the display lamps, when I disconnected the wide multi cable entering the back of the tape, the computer screen went, I think there is no other tape.