![]() ![]() |
|
![]() |
307 Trip Computer |
• Homepage » PEUGEOT MODIFIED PLATFORM » 307 |
08.05.2020 18:49 | # 1 |
![]() |
|
|
08.05.2020 18:49 | # 2 |
![]() |
|
You cannot interfere with the button on the signal lever on the display clock. The tape information in the middle of the road computer is located on the screen. If your vehicle has this feature, you can control it by pressing the button on the wiper arm.
|
08.05.2020 18:49 | # 3 |
![]() |
|
Thank you, I think there is a problem or there is no feature in the car, it shows only hours and degrees and there is no change if I press the button on the wiper arm.
|
08.05.2020 18:49 | # 4 |
![]() |
|
I am a 406 user and there was a problem with my car's screen. I heard a lot of advice in the Maslak industry, there was a paris auto, went there in minutes. I have been there for about 1 year. They are good at work and I'm a little pinpirgic, they are very meticulous.
|
08.05.2020 18:49 | # 5 |
![]() |
|
Your vehicle is probably XR. In XRs, unfortunately, the tip of the wiper arm or all of those arms need to change. After the change, the tip of the wiper arm becomes buttoned and you can interfere with the road computer. You will need to open the parameter from the display brain to see the data of the trip computer with the software after the arm change only. |
08.05.2020 18:49 | # 6 |
![]() |
|
Thank you very much for your attention.
|
08.05.2020 18:49 | # 7 |
![]() |
|
I think it was in the forum, about how to make that button on the 3-line display for 206s. Even if the arm is the same arm model is different. Unfortunately, the process of connecting and introducing to the computer is necessary.
|
08.05.2020 18:49 | # 8 |
![]() |
|
I have a 2004 1.4 hdi xr rear wiper part is inserted. In the circuit in the circuit, maybe it will be activated automatically if we touch the button for the purpose of testing. I think that there is no need to make a button if it is already activated when testing the button in the forum.
|
08.05.2020 18:49 | # 9 |
![]() |
|
Do you have the opportunity to activate the road computer with your obd bluetooth device without making the button on the wiper arm of your friends
|
08.05.2020 18:49 | # 10 |
![]() |
|
Unfortunately, you can only read and delete instant information and error codes with that device. To turn vehicle features on and off, you need to have pp2000 peugeot planet program and interconnect cables.
|
08.05.2020 18:49 | # 11 |
![]() |
|
Does the Elm327 iobd2 bluetooth cable work between pc and bsi? In other words, when we connect the laptop to the one with blooth obd, can we do it with the pp2000 planet program from the laptop? If there is such a possibility, it would be more logical to buy bluetooth obd instead of cable.
|
08.05.2020 18:49 | # 12 |
![]() |
|
unfortunately , you cannot connect with my teacher bluetooth obd devices. There is a special connecting cable, it should be. The cable in the picture is in that black box, you need to get the chips from the product in the current link. |
08.05.2020 18:49 | # 13 |
![]() |
|
Well, there is no program other than my teacher pp2000, maybe they have different attachment types for these works.
|
08.05.2020 18:49 | # 14 |
![]() |
|
Unfortunately, you will not have a teacher or a special service from this device.
|
08.05.2020 18:49 | # 15 |
![]() |
|
Eywallah, my teacher, God be happy, if a philanthropist who uses pp2000 for this job comes out, it would be nice around izmit
|
08.05.2020 18:49 | # 16 |
![]() |
|
Had you been in Ankara. unfortunately i don't know in izmit
|
08.05.2020 18:49 | # 17 |
![]() |
|
Is there anybody in Istanbul who uses lexia, diagbox etc.? No matter how many places I have gone, the exorbitant price is shaking from the beginning. they will take me in the end.
|
08.05.2020 18:49 | # 18 |
![]() |
|
I searched for a cerebellum in Izmit and I saw that, when I explained the incident in detail, he said, we will not be getting problems because it doesn't get bread. If we collect money from the forum and take a diagbox into the forum, the members will use it. ![]() |
08.05.2020 18:49 | # 19 |
![]() |
|
![]() Is there a friend who knows where to crack on the plate to send commands from the circuit inside the arm to the computer |
08.05.2020 18:49 | # 20 |
![]() |
|
[QUOTE = erk4n] ![]() Is there a friend who knows where to crack on the plate to send a command to the circuit computer in the circuit inside the arm [/ QUOTE] As I understand it from the photo, there is a button on the end of the arm, it may need to be activated from the computer. Best regards.
|