|
|
|
|
307 Torpedo and Lock Removal |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 307 | |
| 08.05.2020 14:11 | # 1 |
 hasimayaz |
|
|
C5FG2FF1 - 307 REMOVAL - REFITTING PASSENGER TORPIDO 1 - REMOVAL With the help of a plastic spatula, remove the ventilation grille on the right side.
Remove the instrument panel connection side cover upper clip by passing the hand through the vent. Unclip the right side cover, unscrew it. Open the glove box.
Remove the retard roller (2). Remove the hinges of the instrument panel by lifting it off the cover. Remove the glove box.
Remove: the hooks (3)
Remove: lighting lamp (5) Remove the bottom of the glove box and remove it. 2 - REFITTING Follow the reverse order of removal steps. Control process.
REMOVAL - REFITTING PASSENGER SIDE TORPIDO LOCK NOTE: NOTICE: Unlocking requires replacement. 1 - REMOVAL
Pull the handle (2) so that you can insert a plastic spatula [1] behind the lock (1). Press firmly on the handle (1) to release the lock (A) from its seat. Remove the lock. 2 - REFITTING Insert the new lock into its slot. Test run.
|
|
| 08.05.2020 14:11 | # 2 |
 individual |
|
|
thank you I had not thought about removing the side. I was hoping I would get it off the hinges
|
|
| 08.05.2020 14:11 | # 3 |
| individual |
|
|
Haşim had already made the necessary explanation. According to these explanations, I removed my glove cover. I took a few pictures while disassembling. maybe it can contribute. First of all, we need to remove the ventilation grille on the passenger side. When disassembling, we need to use a plastic spatula. Otherwise if the fruit is in the knife, we need to wrap the knife with a cloth so that it doesn't scratch around   We need to remove the plastic part on the side by hand from the gap of the ventilation grille we removed.   unfortunately, we cannot remove the mechanism that creates a resistance effect on the glove cover without removing this plastic part. this mechanism prevents the lid from falling down when it is opened. it enables it to open at low speed with a certain resistance. Even if the door opens 90 °, we will not be able to see its screw. because he was very low. Using the mobile phone, I looked at what kind of screw it has. but it is necessary to use a flexible screwdriver here.   After this mechanism comes out, we can remove the glove cover. I will also try to disassemble the glove box. As you know, plastic. I want to use a cloth called broadcloth used in billiard tables. If there is a hard object in the journey, it can click. tomorrow maybe I will find it from the barriers
|
|
| 08.05.2020 14:11 | # 4 |
 golge_oyunu |
|
|
I think the spring of the lock of the glove cover has come out, can I make another bow and is it possible without removing the lock ??
|
|
| 08.05.2020 14:11 | # 5 |
 ByHack |
|
|
Thank you for your work.
|
|
