Peugeot Forums - Peugeot Fan Club

307 tire pressure

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 16:49 # 1
endorphine
My 2006 model 307 car is equipped with brigdestone 195/65/15 tires. I asked several people, but I did not get an exact answer. What tire pressures should the vehicle have?
08.05.2020 16:49 # 2
metin
[QUOTE = endorphine] My 2006 model 307 car is equipped with brigdestone 195/65/15 tires. I asked several people, but I did not get an exact answer. What should be the tire pressures of the vehicle? [/ QUOTE]

When you open the driver door of the vehicle, you can see the value of the paint code and tire pressures in the part where the door hinges are. & Nbsp;

If I remember correctly, the vehicle should be 2.5 bar when empty and the rear should be 2.7 bar when full. & nbsp;

It is calculated as psi instead of bar in some stations. & Nbsp;

1 bar = & nbsp; 14.50326 psi.

< div> 2, 5 bar is 36.2 ps corresponds to. & nbsp;

So 35 psi when your vehicle is empty and 37 psi when full is sufficient.
08.05.2020 16:49 # 3
endorphine
True, this information is available at the edge of the door. I hesitated that there was no psi. Also 35psi isn't it? They usually say 30 or something. Of course, it varies according to the vehicle and tire. My concern is not to over-inflate the tire. Let's not have an eye when we say eyebrow.
08.05.2020 16:49 # 4
hsnsnl
If you press those airs according to our roads, your vehicle will not have any stretch, but it will take the path to your vehicle. You must press between 30-32psi 4lastigedex
08.05.2020 16:49 # 5
selkentli
I agree with hsnsnl on average, 32-33 on our roads, but you should increase the load on your vehicle especially on long road, 36 writes in the gasoline machine listings, but if you think how loud the suspension system works in 307 & nbsp; br> You complain about the sound and hitting hard.
If you read the explanation on the tire you can press up to 40 :))

I use an average of 33 fine ..
& nbsp; no accident-free driving ...
08.05.2020 16:49 # 6
metin
[QUOTE = endorphine] Right, this information is on the edge of the door. I hesitated that there was no psi. Also 35psi isn't it? They usually say 30 or something. Of course, it varies according to the vehicle and tire. My concern is not to over-inflate the tire. Let's not take a look when we say eyebrow. [/ QUOTE]

I used the same car and the same tire for a long time. You can safely print 35 psi.

is already writing 2.5 bar (36 psi) at the door of the vehicle. & Nbsp;
text 2012-05-31 18:46:08
08.05.2020 16:49 # 7
koliva
As the text says, whatever is written on the doorpost should be applied with confidence. & Nbsp;
08.05.2020 16:49 # 8
endorphine
Thanks for the answers. I'm going to buy gasoline tomorrow. By the way, I can handle it now.
08.05.2020 16:49 # 9
Cmoss06
32 normal
08.05.2020 16:49 # 10
206206
& Nbsp; turkey & nbsp; ways & nbsp; known & nbsp; & nbsp; Surprise & nbsp; pit & nbsp; Can go & nbsp; therefore & nbsp; 32 & nbsp; fine & nbsp;
08.05.2020 16:49 # 11
tellotello
I never understood this business at all. I showed it to 5 different masters (a few bikers, a few tires), all said 32 bass. I write 36 (2.4 bar) at the door, trust the masters and print 32. Every time 307 min front wheels give the air as if it is low (after all, the engine is more weight in the front). Conclusion: no problem with confusion and 32 psi tires :)
08.05.2020 16:49 # 12
tellotello
[QUOTE = tellotello] I never understood this work either. I showed it to 5 different masters (a few bikers, a few tires), all said 32 bass. I write 36 (2.4 bar) at the door, trust the masters and print 32. Every time 307 min front wheels give the air as if it is low (after all, the engine is more weight in the front). Result: confusion and no problem with 32 psi tires:) [/ QUOTE]

Sorry, 2.4 bar will be 34 psi while the backs are loaded, it says 2.5, 36psi.
08.05.2020 16:49 # 13
metin
[QUOTE = tellotello] [QUOTE = tellotello] I never understood this work either. I showed it to 5 different masters (a few bikers, a few tires), all said 32 bass. I write 36 (2.4 bar) at the door, trust the masters and print 32. Every time 307 min front wheels give the air as if it is low (after all, the engine is more weight in the front). Result: confusion and no problem with 32 psi tires:) [/ QUOTE]

Pardon will write 2.4, 36psi with backs loaded with 2.4 bar 34 psi.
[/ QUOTE ] It is comfortable to be lower than

but it is not healthy. & nbsp;



When tire air is missing, only the edges of the tire hold onto the road, the middle part does not, and when the air is too high, only hold the middle part on the road. When there is too much or too much air, it will negatively affect you from braking distance to knocking in curves, from rolling resistance to increase in fuel.
-
press the air.
08.05.2020 16:49 # 14
cnrars
friends my car was going to clutter, I bought an tire from anak directions 2 weeks ago, petlas, 195 65 15 dimensions, I said let me check the weather while coming today, prevents 61-57 rear 49-57, I couldn't believe it, I went to another place, 1 less or less any values. & nbsp;

I made them all 32, this roller is the way it goes, it's not like the tires, right? Could there also be a problem in the front teams? because it was felt on the road if there were roasted chickpeas, the car of the clown.


08.05.2020 16:49 # 15
mami202
& nbsp; low & nbsp; the fact that the air pressure gives comfort effect & nbsp; our master tires have pressed and sent the air of 29 psi how nice the car is going to be quietly soft, so I checked it in the gas so I looked all 29 & nbsp;
& nbsp I did 32 psi, all the old sound and hardness started & nbsp; we learned that the air pressure affects quite a lot.
& nbsp;
08.05.2020 16:49 # 16
ahmet_bjk

If the tires you use are the original size, you should definitely use the values written on the door of the vehicle.

If you press it too much, driving quality & nbsp; decreases, braking distance increases & nbsp; and you save fuel.

If you press less, driving quality increases, steering wheel becomes harder to turn & nbsp; but it burns more than usual.

The most ideal is the values recommended by the manufacturer. Because the pressures of hot air and cold air are different.

Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”