307 Switchblade

Guys, I'm not as if I'm constantly bombing with questions, but & nbsp; this car breakdown comes in a row.

the same keyring is here 19.90 friends. Is this product original? There are similar phrases here.

I can not say anything about the problem, but if your vehicle has a helmet, the insurance company could completely get out of the job in cases such as theft with a key other than the original key (God forbid).

I will not be able to respond to the burning lamps, but I had the same key switched in Istanbul for 40 TL.

csalli: Thank you so much for your reminder. I will meet with my insurance company on this matter.

As I said, I can not say anything about the malfunction, and it will be the best way to connect it to the device. you have a key ring, I know this is a bit more expensive in the authorized service ...

The control of my vehicle was also broken. It is not a job that requires manual skill. After opening the bottom part of the key box with a pointed knife, there are passes in the box where the mechanism will sit. I gave 35 TL.

I do not know the price of the original key, but they change the switched switch set to 30-40 lira except the chip and key. They said that the spare key included in the replacement, including the complete chip and key, they cost a figure of 200-250 TL. It was around -200 TL, so do a research on the internet for the trouble of distracting yourself.

I changed it myself, I have been using it for about 7-8 months without any problems. I bought it for 40 TL. I opened the end to the keymaker.

I got the price from several places. The guys gave the price of 50TL for the replacement of the case of the existing key, and 180-220 TL for the construction of the re-chip key. tuncaksoy 2011-11- 01 10:36:47

Meanwhile, the malfunction became clearer. I think the warning lights were on because the lady opened the car from the remote first and then started the car with the 2nd spare key without the remote. I just took a tour with the spare key yesterday, there was no problem. I think the computer went into theft mode when using both keys.

I think it would be better if you put it on a good auto keymaker, if you have the skill of hand, you can do it yourself but if you say there is no tamper like me

It sounds like I can handle the card, but the real question is this key tip. You see the clip in the picture below. Do you think I need to remove the key tip from that clip and insert it into the other, or should I open the key to the keymaker? tuncaksoy 2011-11-01 12:20:07

My friend, if you still haven't received the remote, check it out,
you will both renew the remote and give your car an alarm, otherwise of course

http://www.sahibinden.com/ilan/vasita-aksesuar-tuning-otomobil-arazi-araci-victor-oto-alarmi-62827723/detay/ my eye 2011-11-01 12:49:06

o switch circuit to any circuit cable etc. I know that it is not connected. But be careful, don't damage the immobilizer, it's very costly to get it done again.

[QUOTE = tuncaksoy] Brother card looks like I can handle it, but the real question is this key tip. You see the clip in the picture below. Do you think I should remove the key tip from that clip and insert it into the other, or should I lead the keymaker to the new key? [/ QUOTE] When I wanted to do it like you said my friend, the original key was great in the slot of the key in the remote I just bought, Either I would have thinned the original key with file or grinding method so that the durability would decrease or I would have the new key made in the key switch, so that I had it made the original key and the chip was transferred to the new remote, and the new key was left in the key switch with the old key and the broken container next to the spare key :)

Thanks for the comments. Now I can not give my heart to the guy to give this key to such a man and say "uhh it didn't happen uh" =)

[QUOTE = my eye] My friend if you still don't get the remote control, check this out,
you will both renew your commander and alarm your car, otherwise, of course

http://www.sahibinden.com/ilan/vasita-aksesuar-tuning-otomobil-arazi-araci-victor-oto-alarmi-62827723/detay/ [/ QUOTE ]

[QUOTE = tuncaksoy] Thanks for the comments [ / QUOTE] I went to a normal keymaker, the normal key machine put my original key on one side, put the new key on the other side and pressed on it :) He said, I tried it already, but the machine he built was not a computer or something, something similar to the old grinding machine :)

In the meantime, one more warning is that when you take care of the key of that key, when you take a few turns, if you insert it with a few turns, the key stops, if you wrap it by wrapping too much, this time will open spontaneously and it becomes very hard. If you can make a presentation, be careful when opening the switch, so that you do not press the spring, you will collect it back in its original form.