![]() ![]() |
|
![]() |
307 sw snippet |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 15:37 | # 1 |
![]() |
|
Is it possible to repair this? is the screen changing? or what is the other solution method?
|
08.05.2020 15:37 | # 2 |
![]() |
|
the http://forum.peugeotturkey.com/forum_posts.asp?tıd=7976&title=peugeot-206-307-saat-lcd-ekrann-skl How to get out of this link is written. There should be 3 lamps at the back. Check their robustness. I have always read, though horizontally faint, not horizontally faint. I hope yours is no more than a simple bulb replacement. |
08.05.2020 15:37 | # 3 |
![]() |
|
chronical problem summer periods how to manage this way
|
08.05.2020 15:37 | # 4 |
![]() |
|
it gets silent in the hot and even it is not read in a sunny environment, but if it is read at night, you have nothing to do, unfortunately it is a very stiff situation and if the chronic error does not burn at all, you can make 3 ampoules for 10 TL.
|
08.05.2020 15:37 | # 5 |
![]() |
|
friends do not show the same day and night. I'll learn to disassemble and check the lamps as you say ...
|
08.05.2020 15:37 | # 6 |
![]() |
|
I threw in PM. |
08.05.2020 15:37 | # 7 |
![]() |
|
friends dismantled the lamps. everything is intact but again the top of the screen is working the bottom is not working. I guess the display screen is defective !!!
|
08.05.2020 15:37 | # 8 |
![]() |
|
[QUOTE = fordtaunus] friends I removed the lamps. Everything is intact but again the top of the screen is working the bottom is not working. I guess the display screen is defective !!! [/ QUOTE] As I said in my previous message, if there was a problem with the lamps, the lower upper part of the screen would be horizontally separated as you say. In other words, horizontal separation, not vertical separation. I think there is an error in your electronic circuit. Unplug the electronic circuit and there may be a cold solder search with buyutec. If you do not understand from these works, insert the circuit and let the gourmet take a look at an electronics store. |
08.05.2020 15:37 | # 9 |
![]() |
|
ford taunus my friend insert the screen, the cables of the lcd panel on it are stuck to the panel where the electronic circuit is located, there is a rupture in the places where it is sticky, there is something to come on and tighten it, it is likely that it works.
|