307 SW rear upper stop and license plate light removal ...

Hi friends ... My car's 307 SW & nbsp; back door top stop and license plate lights are not lit, probably their lamps might have exploded. How to disassemble these devices.

If you don't have experience, don't ever bother me.

I do not know the top stop, but the best way to remove the license plate lamps is to remove the tailgate trim and remove the windows in front of the lamp with a screwdriver. Then you change and install the bulbs. If you try to remove the windows from the outside, you will break your nails.

Your problem is not a lamp problem, it is an insurance problem. Before entering the lamp replacement process, check the fuse in the siphon 10 Amp F22 fuse. This fuse controls the 3rd stop and license lamps. Reviews

I don't think it's from the fuse, because one of the license plate lamp is on ... When I look at the license plate lamp from the outside, water and mud have accumulated in the lamp from the gasket, and if I turn it on, I think to clean it ...

[QUOTE = Dude] I don't think it is from fuse, because one of the license plate lamp is on ... When I look at the license plate lamp from outside, water and mud have accumulated in the gasket, and if I turn it on, I think to clean it ... [/ QUOTE]

In your first article " I thought that both of them were not burned because you wrote "plate lightings". So for the third stop lamp, you have to insert the two bolts first. Then you need to have two clips, you have to spring them out, but in general, this part breaks. Maybe it would be better if you had this done to a knower. For the license plate lamp, you can remove the transparent part by removing it from the outside.
koliva 2012-01-02 13:02:34

[TUBE] bpclqg0irjc [/ TUBE] Reviews

Mr. Moderator, the video image worked very well and I also removed the cover, cleaned it and put it on white led lamps, it is very stylish and beautiful now ... Thank you ...

[QUOTE = Dude] Dear Moderator, the video image worked very well and I also removed the cover, cleaned it and put it on white led lamps, it is very stylish and beautiful now ... Thank you ... [/ QUOTE]

You're welcome. Get well soon.

The rear upper brake light has not been lit up since I bought the vehicle ... How many times I tried to disassemble it, I have not been successful .... But & nbsp; I put it in the head today, I managed to disassemble it ... no damage, even if I did some damage to the stopper ... & nbsp;

I removed the long & nbsp; protection & nbsp; plastic at the top of the tailgate and there are four holes in the part behind the full stop. There are tabs of the stop lamp at the bottom of the head and at the end of the head, and with the help of tornovida, if you push them towards the front, you get rid of the stop socket ... & nbsp;