|
|
|
|
307 sw aux |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 21:06 | # 1 |
 sahinsenturk |
|
|
As you know, 307 and 307sw do not have aux / USB inputs. Since my car is not a 2006 model 307 sw and aux, I wanted to have it installed in multimedia. It has 600₺ and 1600₺. Just aux input is enough for me. I asked a few people about it, they said very hard. First of all, can I add aux output to this vehicle. Is there anyone you can recommend in Istanbul and Kocaeli about this? If you say it is difficult, I will be obliged to have multimedia installed, so I am open to your suggestions. Thanks in advance
|
|
| 08.05.2020 21:06 | # 2 |
|
I know my teacher has a translator. They put it from the tape with a cable to the torpedo. Like a cigarette pack. It's happening in Bluetooth or something. There was such a thing.
|
|
| 08.05.2020 21:06 | # 3 |
 Dogan kucukarslan |
|
|
2005 307 there was 3 days ago, I thought they would not have said it to me. Izmir 2 industry Ibrahim Ibrahim took it 150 tly.
|
|
| 08.05.2020 21:06 | # 4 |
| sahinsenturk |
|
|
I wish I was close to Izmir, but I should have, but I have to find it in and around Istanbul :(
|
|
| 08.05.2020 21:06 | # 5 |
 ersin61 |
|
|
Dude, I have added a picture below. I did not, but the simple method will cost 3-5 lira. If you have an Aux cable, you can do it yourself. |
|
| 08.05.2020 21:06 | # 6 |
| sahinsenturk |
|
|
Hi there is only the picture you call link right?
|
|
| 08.05.2020 21:06 | # 7 |
| ersin61 |
|
|
I'll fix the correct sorry ..
|
|
| 08.05.2020 21:06 | # 8 |
 OguzhanKucuk61 |
|
|
Could you share the link of the subject you shared the photo of @ ersin61?
|
|
| 08.05.2020 21:06 | # 9 |
| ersin61 |
|
|
No link, only photo ...
|
|
| 08.05.2020 21:06 | # 10 |
| ersin61 |
|
|
Entry places are visible. If you want, please give a number from the photo.
|
|
| 08.05.2020 21:06 | # 11 |
 hozer33 |
|
|
1: 2004 this picture is correct in 307 xs 2: If it is correct, which button we press on the tape after the connection becomes aux.
|
|
| 08.05.2020 21:06 | # 12 |
 maximusti |
|
|
not according to vehicle brand and model, it varies according to tape brand model, it can be used by opening the inside and soldering it into or into its rear socket, or by purchasing a ready-made apparatus.
|
|
| 08.05.2020 21:06 | # 13 |
| hozer33 |
|
|
I deniyce
|
|
| 08.05.2020 21:06 | # 14 |
| OguzhanKucuk61 |
|
|
How will it switch to aux mode at tape startup after soldering? Is there a blank CD insertion event in this application? 3 cables come out of each aux cable? How do we decide which one is where when soldering the cable ends to the pins? Please enlighten me
|
|
| 08.05.2020 21:06 | # 15 |
| ersin61 |
|
|
To switch to Aux mode, you need to activate with pp2000. It is active in some vehicles. Go to the electronics shop with the scheme. It writes the connection types of the feet, 4. pin red arrow right sound 10. pin yellow arrow left sound white arrow indicates the earth, chassis.
|
|
| 08.05.2020 21:06 | # 16 |
| ersin61 |
|
|
There is no need to solder small F plugs, they fit perfectly. 3 small F plugs do your job. Cable and Aux tip ...
|
|
| 08.05.2020 21:06 | # 17 |
| OguzhanKucuk61 |
|
|
@ ersin61 thank you Ersin brother
|
|
| 08.05.2020 21:06 | # 18 |
| ersin61 |
|
|
You're welcome as I share the information. I hope it works for many people ..
|
|
