Peugeot Forums - Peugeot Fan Club

307 Suspension Sound?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 16:32 # 1
Guests
Hello friends. I will ask you something as I pass through these sets, while passing through the highs and the wide ones, the car goes right on top of it, and as I get off, it sounds like `` I AM SURPRISE ''. It feels like it rubs the bottom. what can shock absorbers be? It does not happen when passing through small sets, it sounds like normal suspension sound. But this is how it comes from elders
08.05.2020 16:32 # 2
yavuz25
You may have bent the shock absorber. The wheel may be rubbing.
08.05.2020 16:32 # 3
Guests
[QUOTE = yavuz25] You may have bent the shock absorber. The wheel may be rubbing. Wait now, how is it, how will the tire be said? There is no problem going straight through the sets.
08.05.2020 16:32 # 4
yavuz25
[QUOTE = xSOLOx] [QUOTE = yavuz25] You may have tilt the shock absorber. The wheel may be rubbing. Let's look at the wheel of the wheel in the hood. [/ QUOTE]
I'm afraid of the answers I feared. .:) & nbsp; Stop now, stop how, so how will the tire say yahu to the hood? When going straight, there is no problem passing through sets. [/ QUOTE]
If you tilt the amateurs in the wheel, you will drive the amater, while passing through the sets. Check it out. My location bell. "Wink"
08.05.2020 16:32 # 5
Guests
my shock absorber rub my hood ??
08.05.2020 16:32 # 6
yavuz25
[QUOTE = xSOLOx] rubs my shock absorber to my hood ?? [/ QUOTE]
if it rubs on the blower blower. "Wink" />
08.05.2020 16:32 # 7
yavuz25
I said that you will look at the hood from there. "Wink"
08.05.2020 16:32 # 8
Guests
My brother, I examined it, but I couldn't find any rubbing ... what else could it be? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S
08.05.2020 16:32 # 9
yavuz25
[QUOTE = xSOLOx] My brother, I examined it, but I couldn't find any traces of rubbing ... what else? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S [/ QUOTE]
is coming from where I called the rubbing sound. Check it out well. = "Wink" title = "Wink" /> Another point is that if the vehicle is low and you will go through a high set, cross it, one side will fall, then the other side will fall. It will not hit the bottom.
08.05.2020 16:32 # 10
Guests
[QUOTE = yavuz25] [QUOTE = xSOLOx] brother, I examined it, but I couldn't find scars ... what else? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S [/ QUOTE]
is coming from where I called the rubbing sound. Check it well. We know it happened before, we know from there. "Wink" Another point is that if the vehicle is low and you will go through a high set, cross it, one side will fall and the other side will not fall. It will not hit the bottom.
[/ QUOTE]
no lows, not their original size. I have never touched. When I say it comes from the ground, I don't understand how it is: S: S sorry: S
08.05.2020 16:32 # 11
yavuz25
[QUOTE = xSOLOx] [QUOTE = yavuz25] [QUOTE = xSOLOx] brother, I examined it but I couldn't find any traces of rubbing ... what else could it be? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S [/ QUOTE]
is coming from where I called the rubbing sound. Check it out well. = "Wink" title = "Wink" /> Another point is that if the vehicle is low and you will go through a high set, cross it, one side will fall and the other side will not fall. It will not hit the bottom.
[/ QUOTE]
not low, not in their original size. I have never touched. When I say it is coming from the ground, I don't understand from the ground: S: S sorry: S [/ QUOTE] the shock absorber is rubbing his outer bellows. I think nothing else will happen. "Wink" Not important. "Wink"
08.05.2020 16:32 # 12
Guests
[QUOTE = yavuz25] [QUOTE = xSOLOx] [QUOTE = yavuz25] [QUOTE = xSOLOx] brother, I examined it but I couldn't find any traces of rubbing ... what else could it be? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S [/ QUOTE]
is coming from where I called the rubbing sound. Check it well. We know it happened before, we know from there. "Wink" Another point is that if the vehicle is low and you will go through a high set, cross it, one side will fall and the other side will not fall. It will not hit the bottom.
[/ QUOTE]
no lows, not their original size. I have never touched. When I say it is coming from the ground, I don't understand from the ground, either: S: S sorry: S [/ QUOTE] the shock absorber is rubbing his outer bellows. I think nothing else will happen. "Wink" Not important. "Wink" [/ QUOTE]
I did not look there, too: I looked with S light. I'll take a look again tomorrow. Thanks. Isn't there any other choice? He squeaks like this, he squeaks like this: S
08.05.2020 16:32 # 13
yavuz25
[QUOTE = xSOLOx] [QUOTE = yavuz25] [QUOTE = xSOLOx] [QUOTE = yavuz25] [QUOTE = xSOLOx] I have reviewed my brother, but I couldn't find any traces of rubbing ... what else could it be? By the way, before you hit these sets, did you rub the bumper before hitting the bottom of the car? I mean, I think it hits my gold, but doesn't it have to hit the bumper first? Nothing in the bumper: S [/ QUOTE]
is coming from where I called the rubbing sound. Check it out well. = "Wink" title = "Wink" /> Another point is that if the vehicle is low and you will go through a high set, cross it, one side will fall and the other side will not fall. It will not hit the bottom.
[/ QUOTE]
not low, not in their original size. I have never touched. When I say it is coming from the ground, I don't understand from the ground, either: S: S sorry: S [/ QUOTE] the shock absorber is rubbing his outer bellows. I think nothing else will happen. "Wink" Not important. "Wink" [/ QUOTE]
I did not look at there either: I looked with S light. I'll take a look again tomorrow. Thanks. Isn't there any other choice? What does it mean to squeak like this: S [/ QUOTE]
Look, squeak, do you think other places will get mixed up? What kind of sound is it? "Smile"
08.05.2020 16:32 # 14
Guests
Let's say squeak we exceeded the sound of rubbing I couldn't see rubbing :)
08.05.2020 16:32 # 15
djchaos
it can be lips in front of the vehicle, if there is sound when steering the steering wheel, there may be shock absorber upper wedges as if it is squeaking, it makes sound in z rods, but if it comes from the back, if the sound comes from behind, the rear wedges are gone, look at the bow of the vehicle. Take it to the master and have the master test the vehicle.
08.05.2020 16:32 # 16
Guests
[QUOTE = djchaos] may be the lips in front of the vehicle, if there is sound when turning the steering wheel, the shock absorber may be in the upper wedges as if it is squeaking, it makes sound in the z rods, if it comes from the back, if the rear wedges are gone, look at the springs of the vehicle. Determine exactly, take it to a good master and have the master test the tool. [/ QUOTE]
Thank you guys. Let's go to the service. what is my expense estimate?
08.05.2020 16:32 # 17
djchaos
If my friend is a service, I can not say anything, but as far as I can see, the bottom of the pugs is not so expensive, middle sugar, I have changed the left and right rods, the original is between 40 and 45 TL. The original is between 20 and 25 TL. Contact the sponsor of the forum for both affordable prices and original parts

Şahin Peugeot
Original Spare Parts
0216 631 10 80
0216 631 18 12
0533 301 88 06
www.peugeotmarket.com
08.05.2020 16:32 # 18
Guests
[QUOTE = djchaos] dude I can't say if the service is anything but as far as I can see, the bottom weft of the pugs is not so expensive middle sugar I have changed the left and right rods, the original is between 40 and 45 TL, the original is between 20 and 25 TL, if there is a small problem, 100 TL is the most but you mislead I would like to keep it below contact the sponsor of the forum for the piece above, both affordable price and original parts

Şahin Peugeot
Original Spare Parts < BR> 0216 631 10 80
0216 631 18 12
0533 301 88 06
www.peugeotmarket.com [/ QUOTE]
Well let me do that. First of all, let's find the problem which parts are going to be replaced.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”