307 Speed Stabilization Assembly (Pictured)

One (from hawk pejo) speed stabilizer arm is taken. Installation work is started on our pejo without speed stabilization system. As you can see, the space with the speed stabilizer arm is empty. Pay attention to the ends and use a screwdriver according to it. There is a small plastic cover where the arm will be inserted. you can do better ... view from the mounted version of the arm and finished version If you have the PP2000 software later, we make the following changes on the brain and activate the arm. This part is about the ECU. On the left side it says which menus are entered, respectively. Cruise Control was absent, present and recorded. pictures by koliva This part is about BSI. Speed regulation was absent, present was done. pictures by koliva let's come easy ... by the way, i bought a hawk pejo with a special offer, they are attracting unnecessary price in other places .. and thank you to the related friends in hawk pejo.

Hi friend, I bought the arm via the internet, instead of assembling it fully (I think someone who did not know did it), but I couldn't get it. Is there a master on the European side of Istanbul to do this

[QUOTE = istanbullu_3886] hi friend I bought the arm over the internet instead of assembling it fully (I think somebody did not know how to do it) but I couldn't get it set up. Is there a master on the European side of Istanbul? DIV> & nbsp;

it depends on the vehicle's equipment, engine volume and fuel type to activate this cruise control.

Guys, what's the difference between these cruise control and speed limiter arms? Isn't the two processes from the same arm?

My vehicle 206+ there is the location of the arm for this process is present on the ground in the instrument panel, but I have never seen it from this arm. The price of the arm in the service is 170TL (I looked at the servicebox) Is it possible to find and open the arm cheaper?

We thank you...

I think my text may not be CC in the software of every vehicle. In such cases, it may be necessary to renew the software ...

[QUOTE = CeCoLi] I think my text may not be CC in the software of every vehicle. In such cases, it may be necessary to update the software ... [/ QUOTE]

[QUOTE = sahin-peugeot] We thank you. com / smileys / smiley7.gif "height =" 19 "width =" 19 "border =" 0 "alt =" Edgy "title =" Edgy "/>

[QUOTE = text] [QUOTE = CeCoLi] I think my text may not be CC in the software of every vehicle. In such cases, it may be necessary to update the software ... [/ QUOTE] [/ QUOTE]

[QUOTE = CeCoLi] [QUOTE = text] [QUOTE = CeCoLi] I think my text may not be CC in the software of every vehicle. In such cases, it may be necessary to update the software ... [/ QUOTE] [/ QUOTE]

[QUOTE = text] [QUOTE = CeCoLi] [QUOTE = text] [QUOTE = CeCoLi] I think my text may not be CC in the software of every vehicle. In such cases, it may be necessary to update the software ... [/ QUOTE] [/ QUOTE]

Thank you. It was a nice and useful compilation.

After 17 o'clock, I ordered a discount arm from Şahin Peugeot yesterday and arrived at my house in Ankara before 24 o'clock. I bought and was very pleased, although very surprised. I thank him and his team.

Let's see 206 1.4 For Hdi, if I can get information and run it, I will share it here.

[QUOTE = CeCoLi] [QUOTE = istanbullu_3886] hi friend I bought the arm over the internet instead of assembling it fully (I think someone who doesn't know did it) but I couldn't get it set up. Is there a master on the European side of Istanbul?

[QUOTE = istanbullu_3886] [QUOTE = CeCoLi] [QUOTE = istanbullu_3886] hi friend I have assembled the arm through the internet, instead of assembling it fully (I think someone who does not know did a master) but I couldn't get a master in Istanbul European side

206 1.4 I put the & nbsp; handle on my HD & nbsp; tool that will serve as an ornament for now. :)) & nbsp;

Momotech needs to have a trace because the place where you will attach the cruise control at the bottom cover of your steering wheel has been weakened, so it is certain how to cut it, but since it is not clear where the arm will come in 307s, it takes some time to cut that area, by trial and error method.

Exactly, there was a trail, let's take the piece out in 5 moves with the help of a utility knife. It is interesting that there is no trace of the 307. The vehicle that was originally compatible with this system was 307, leaving marks on the cover of 206. :))

good luck, the driving pleasure is great, it doesn't have to step on the throttle, but when it comes to the ramp, I observed that it increases the fuel as a result of giving full throttle when the speed drops 5-10 km or so. Faruk 2011-09-15 18:07:52

I was going to publish a subject too, but we're late, let's continue on this topic, I add the pictures to my site