|
|
|
|
307 speaker cable |
| • Homepage » PEUGEOT MODIFIED PLATFORM » Peugeot Sound Systems | |
| 08.05.2020 16:46 | # 1 |
 murattiss |
|
|
Selamlar, My 2005 model 307 vehicle has RD3 original tape and original columns on the front / rear doors. I will attach the Hertz DSK 165 component to the front and there are separate crossovers for the tweeters and woofers. My goal is original Installing the crossovers before the speaker and the tweeters without breaking the wiring is possible, but this is only possible if the feed of the front door and tweeter comes directly from the tape. and are there any crossovers or resistors / filters on the cables going to the tweeter, or is it just fed directly into the speaker and the tweeter tape by just splitting the cable into two? 307 I hope that there are those who have knowledge of friends who have installed plumbing. thanks ... & nbsp;
|
|
| 08.05.2020 16:46 | # 2 |
 hsnsnl |
|
|
[QUOTE = murattiss] Selamlar, Original on my 2005 model 307 car RD3 original tape and front / rear doors There are columns. My goal is to install by installing crossovers before the speaker and tweeters without breaking the original wiring, but this is only possible if the feed of the front door and tweeter comes directly from the tape. I want to learn 307` Is there any crossover or resistance / filter on the cables going to the door speaker and tweeter in the original installation? Or is it just fed into the cable and the door speaker and tweeter are fed directly from the tape? I hope that there are people who have knowledge of 307 friends. thanks ... & nbsp; [/ QUOTE] & nbsp; & nbsp; & nbsp ; does not cause any problems that they will pick up the ones they put in.
|
|
| 08.05.2020 16:46 | # 3 |
| murattiss |
|
|
[QUOTE = hsnsnl] & nbsp; & nbsp; & nbsp; & nbsp; does not cause any problems that they will pick up by plugging their places [/ QUOTE] will not sound any problem, but if there is any crossover in the original installation, the sound will be passed through the crossover twice, I want the signal from the tape to pass through the crossovers of Hertz only.
|
|
| 08.05.2020 16:46 | # 4 |
| hsnsnl |
|
|
I also connected the compenant 2 sets as front and back .. I made the connection as I said.
|
|
| 08.05.2020 16:46 | # 5 |
| murattiss |
|
|
[QUOTE = hsnsnl] I also tied the compenant 2 sets as front and back .. I made the connection as I said. QUOTE] There is only one speaker in the back, one cable is going, but if you say, the front speaker and tweeter are picked up directly, you made the system I thought. By the way, which brand model component do you use on the front / back? where did you place the tweeters in the back? & nbsp; < br> Is there enough space under the front tweeter for the crossovers? I bought the front HERTZ DSK 165 DCX 130 backward I take it, I am thinking of doing some isolation when I disassemble it. 14:13:06
|
|
| 08.05.2020 16:46 | # 6 |
| hsnsnl |
|
|
I use powerbass anfi compenant bass .. I use tape pıoneer double religion .. I installed the rear tweeters by opening a hole according to it. etc .. you can not control .. if you have the option to change the tape, the worst pıoneer 2300ub .. peugeot's front console I can say it in full yesterday ..
|
|
| 08.05.2020 16:46 | # 7 |
| murattiss |
|
|
[QUOTE = hsnsnl] I use powerbass anfi compenant bass .. I use tape pıoneer double religion .. I installed the rear tweeters by opening a hole according to it. you can not get full clear sound, you can not control the bass etc .. if you have a change in your tape, you can peel it at the worst pıoneer 2300ub .. peugeot's front console full yesterday I can also peel it .. [/ QUOTE] div> Thanks for the information you provided, we started from one end, I think the sequel comes now, I have been looking at double religions for a few days :)
|
|