|
|
|
|
307 - Signal problem |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 14:05 | # 1 |
 Doktor |
|
|
They say, "Garbage will sink into the eye you are avoiding." The 2004 model, 1.4 hdi, I took my 307 cars to maintenance at 87000 km the other day (for 90.000 maintenance). They did their maintenance. While I have been signaling to the left for about a month only - sometimes - I notice that the signal light is not on the instrument display, I think something like contactlessness. After pressing it lightly with my hand, it starts to burn. (I never checked from the outside) When I signal right, it starts to beat normally, but at the same time, the high beam indicator lights up. I do not understand anything from this, so :) Why do you think this is caused and how to fix it
|
|
| 08.05.2020 14:05 | # 2 |
 CIHANGIR_DONMEZ |
|
|
Mr. Sir, there may be contactlessness in the display. |
|
| 08.05.2020 14:05 | # 3 |
| Doktor |
|
|
Now I tried, I came, I also checked from the outside. Sometimes it burns, sometimes it does not, that is, simultaneously with the indicator. When I give a signal to the left, when it does not light up, when the light is pressed on the lever, both the light and the signal begin to blink.
|
|
| 08.05.2020 14:05 | # 4 |
 hasimayaz |
|
|
you will have to disassemble and check the arm. com 2000 will have to be taken out by removing airbag, steering wheel, plastic covers
|
|
| 08.05.2020 14:05 | # 5 |
| Doktor |
|
|
[QUOTE = hasimayaz] you will need to remove and check the arm. com 2000 will need to be taken out by removing airbag, steering wheel, plastic covers [/ QUOTE] Uff! It looks like a lot of work.
 So is this an expensive process and should it be done in service? |
|
| 08.05.2020 14:05 | # 6 |
| hasimayaz |
|
|
[QUOTE = Doctor] [QUOTE = hasimayaz] You will need to remove and check the arm. com 2000 will need to be taken out by removing airbag, steering wheel, plastic covers [/ QUOTE] Uff! It looks like a lot of work. [/ QUOTE] So is this an expensive process and should it be done in service? We get the price for the arm from the master. it costs 30 to 50 in labor.
|
|
| 08.05.2020 14:05 | # 7 |
| Doktor |
|
|
I pray to you in the blessed saint of Ramadan :) I am waiting for your help :) In the meantime, will disassembling the airbag cause problems in terms of security?
|
|
| 08.05.2020 14:05 | # 8 |
 peugeotefe |
|
|
get well, your fault is due to com 2000 hocam |
|
| 08.05.2020 14:05 | # 9 |
| Doktor |
|
|
Thank you, is this process complicated enough to be done in the service or can auto electricians do it?
|
|
| 08.05.2020 14:05 | # 10 |
 ErkanKurnaz |
|
|
get well soon, GOD not give another big trouble.
|
|
| 08.05.2020 14:05 | # 11 |
| Doktor |
|
|
Thank you, Erkan brother.
|
|
| 08.05.2020 14:05 | # 12 |
| hasimayaz |
|
| 08.05.2020 14:05 | # 13 |
| Doktor |
|
|
I said let me write the result for friends who may encounter the same problem; Now I was stopped by the auto electrician. They sprayed a spray, as my brother said, without removing the handle, it seems to have improved now. I hope it just gets better with that. They said it would be caused by oxidation. Com2000 was very sad to change my car, to be disassembled, to see it, and to see it then :)
|
|