Peugeot Forums - Peugeot Fan Club

307 Right Rear Door Makes Sound?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 16:27 # 1
Guests
Hello Lions, I have a problem with my vehicle and I couldn't solve it with lubrication. The problem is that I open the door slowly, as if the teeth are gone, the git is cracking open twice. When it closes, it cracks and closes once. and the sound is so loud that those who descend are scattered, the car is going down and it goes down like this.
08.05.2020 16:27 # 2
Ucyuzalti
There is something that connects the vehicle with the door. If you stay on the ground, it will tighten the door to prevent the vehicle from closing & nbsp; "Smile"
08.05.2020 16:27 # 3
06OzGuR06



The name of this part is that the door tensioner is a high probability problem. This part provides the door to open and close gradually. Plug & nbsp; When it sounds like it is opening and closing, if it is not resolved by lubrication, you need to replace this part.
06ÖZGüR06 2011-12-16 00:29:01
08.05.2020 16:27 # 4
ByHack
I agree with what my friend says 06ozgur06 :)
08.05.2020 16:27 # 5
Guests
I lubricated the other day, I made this sound on and off for 1 hour or so. but then he repeated this voice. why is this? : S yeah, it's probably out of this piece
08.05.2020 16:27 # 6
ose
If the front fender of the 206's is sensitive and slid backwards, you will say that the door can be attached to the fender and make a sound, how can it be that the simplest attempt to grab one of the front fender can lift the fender. If you bend over and listen, you may notice whether there is a door tensioner or not. Then the sound certainly comes from the door tensioner. Also try lubricating with grease. If it has not been lost, it must have changed. Of course, I do not think it is possible to repair it. The price is around 50tl & nbsp; or higher.
08.05.2020 16:27 # 7
Guests
[QUOTE = ose] If the front fender of the 206's is sensitive, if it slides back, you will say that the door can be attached to the fender and make a sound. If you bend over and listen, you may notice whether there is a door tensioner or not. Then the sound certainly comes from the door tensioner. Also try lubricating with grease. If it has not been lost, it must have changed. Of course, I do not think it is possible to repair it. It is priced around 50tl & nbsp; or higher. [/ QUOTE]
Vehicle 307, and rear right door. thank you for your attention, where can I find grease?
08.05.2020 16:27 # 8
yavuz25
you can find it in any gasoline is not a very expensive thing.After you get it, apply all the door lock springs with oil (part above). you will also see how quiet it is and how it closes (like the Mercedes door); it is fixed by experience.
08.05.2020 16:27 # 9
Guests
[QUOTE = yavuz25] you can find at any gasoline is not a very expensive thing.After you get it, apply all the door lock springs with oil (the above part). You will see how easily it opens and closes at the same time, how quiet it is and how it closes like a Mercedes door (knows;)). It is stable with experience. 17 "width =" 17 "border =" 0 "alt =" Wink "title =" Wink "/> [/ QUOTE]
I'm greasing in the afternoon I'm reporting the result, thanks guys.
08.05.2020 16:27 # 10
yavuz25
But make sure to practice after applying the oil.
08.05.2020 16:27 # 11
yavuz25
Thank you. "Wink"
08.05.2020 16:27 # 12
Guests
yes today I bought 1 liter of grease and 6 rubles with rubber and I lubricated all the doors. it does not open quickly, but it clicks once while opening very slowly: I wonder if the room will improve over time
08.05.2020 16:27 # 13
yavuz25
Let's get used to it. I'm glad it works. "Wink"
08.05.2020 16:27 # 14
06OzGuR06
Unfortunately, this kind of problems occur in our vehicles. Let's be careful not to open the door especially when the ramp is standing down. For this reason, the pin of the door hinge was broken in my old vehicle. "
It is useful to open and close the doors slowly. < br>
08.05.2020 16:27 # 15
ose
Glad to your name.
08.05.2020 16:27 # 16
Guests
friends, thank you very much but lonely clicks when it slowly opens at least & nbsp; i got rid of 3 clicks is there a cure? Or let me ask if the problem is leanness or whether the tensioner is optional? The problem with lubrication was greatly reduced but not resolved: S
08.05.2020 16:27 # 17
yavuz25
The problem is already on the door release. You have reduced it with oil, but it has not been cut completely. As the door is opened and closed in the future, the oil can penetrate and cut it too. smileys / smiley2.gif "height =" 17 "width =" 17 "border =" 0 "alt =" Wink "title =" Wink "/>
08.05.2020 16:27 # 18
Guests
[QUOTE = yavuz25] the problem is already in the door post release. You have reduced it with lubrication but it is not cut completely. In the future, the oil can penetrate and cut as the door is opened and closed. .peugeotturkey.com / smileys / smiley2.gif "height =" 17 "width =" 17 "border =" 0 "alt =" Wink "title =" Wink "/> [/ QUOTE]
< strong> Hmmm so let's wait then. Thanks :)
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”