|
|
|
|
307 RAIN SENSOR GEL |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 19:36 | # 1 |
 riderzist |
|
|
307 rain sensor does not work due to glass change. the owner of me before me had an olimpia brand. The man who put the gel on half an even slope. The sensor has nothing to do with the original glass. There are vehicles that use normal olimpia sensors. Do not respect the masters who say that it is not the original glass. I wonder where can I get this gel. I have researched this gel before, I found the code of the genus. I will apply the gel myself, if there is a sale on the internet, I would be happy if you specify a link. In the meantime, when I take it from the arm to the automatic position, the rain sensor does not work, and it lights the headlights continuously regardless of the day and night.
|
|
| 08.05.2020 19:36 | # 2 |
| fætih |
|
|
the olimpia rain sensor on my windshield works fine but i'm not sure of the headlight sensor. its sensitivity may be too low. When it goes into the dark environment with its headlights off, it turns on immediately but does not turn off the headlights in the morning. though it was not focusing the same mornings immediately. If they can change the lumen setting in the service, I will handle it. opel was very successful in this regard.
|
|
| 08.05.2020 19:36 | # 3 |
| xmen |
|
|
The olimpia brand in my ten glasses .. No problem, it works fine .. If you fix the gel, the problem is solved probably ..
|
|
| 08.05.2020 19:36 | # 4 |
| riderzist |
|
|
thanks guys I was thinking about changing the gel. I have to disassemble and put it again, is it found in glass shops? I couldn't find it on the internet.
|
|
| 08.05.2020 19:36 | # 5 |
 seloergin48 |
|
|
My friend works without changing the gel sensor. If the silicon is too tight under the iron foot of the sensor that is attached to the glass you need to pay attention to, it does not stick to the glass, so the sensor will not work. Look, maybe you can save it without any cost. |
|
| 08.05.2020 19:36 | # 6 |
 sonerkyl |
|
|
[QUOTE = seloergin48] IT WORKS WITHOUT CHANGING MY FRIEND GEL SENSOR. If the silicon is attached to the glass you need to be caught under the iron base, the silicon does not adhere completely to the glass. The sensor does not work. LIKE BECAUSE YOU CAN SAVE WITHOUT EXPENSE. DOES THE SENSOR FULL SEAT FROM THE FRONT SIDE WITH THE LOCK. [/ QUOTE] Capitalization is prohibited due to forum rules. good forums.
|
|
| 08.05.2020 19:36 | # 7 |
 fikoa |
|
|
friends my rain sensor gel on my c4 vehicle was damaged. It was intermittent every five seconds when I put it into automation due to its damage. So, I removed the sensor and cleaned the old pad, and cleaned it with no gels or pads. Then I smeared the liquid transparent silicone I bought from a stationery all over the front of the sensor and immediately attached it to the glass. Now the sensor works great. If you are having the same problem, you can apply this process. No need to look for a different gel.
|
|
| 12.07.2020 23:42 | # 8 |
| Omerfff |
|
|
Hello, after removing the sensor, you all plucked the silicone on it.
|
|