307 radio problem - 307 - Peugeot Forum

I'm saying for RD4 device models. No code is required. The code of that device is registered in the vehicle's brain, it does not work if it is installed in another vehicle. But as long as its own radio is installed, it always works without entering the code.

It is easy to push it out from there when you remove the eye under the radio. But you don't pull it out directly, there are pegs that hold the radio all over. You should be able to press all four of them (inside the radio box) to get rid of it. Maybe you can recover it with your finger from the spaces next to it. But the most comfortable; There are 4 holes in front of the radio near the corners. Languages get rid of it when they put something very hard on there. I put on the thin L allen wrenches, you can also use a wire hairpin or something.

When you pull the radio, there will be a large socket and thin antenna connections. The socket has a transformer-like latch. You lift it and separate it. If I remember correctly, the antenna input was a bit harsh but it was removed by turning it.

08.05.2020 17:46	# 1
kara_simsek
Friends Hello 307 I have a problem with my radio. (entering code etc.) thanks in advance ...

08.05.2020 17:46	# 2
impact
If you don't have a changer, pull out the bottom compartment and then put your hand back and push it.

08.05.2020 17:46	# 3
kara_simsek
thanks no impact changer, i will try it on saturday.

08.05.2020 17:46	# 4
ondercan
http://www.fitaudio.com/ This link will help. Choose the 307 when you click on the peugeot emblem. Good luck with

08.05.2020 17:46	# 5
eeccaa
I'm saying for RD4 device models. No code is required. The code of that device is registered in the vehicle's brain, it does not work if it is installed in another vehicle. But as long as its own radio is installed, it always works without entering the code. It is easy to push it out from there when you remove the eye under the radio. But you don't pull it out directly, there are pegs that hold the radio all over. You should be able to press all four of them (inside the radio box) to get rid of it. Maybe you can recover it with your finger from the spaces next to it. But the most comfortable; There are 4 holes in front of the radio near the corners. Languages get rid of it when they put something very hard on there. I put on the thin L allen wrenches, you can also use a wire hairpin or something. When you pull the radio, there will be a large socket and thin antenna connections. The socket has a transformer-like latch. You lift it and separate it. If I remember correctly, the antenna input was a bit harsh but it was removed by turning it.

	307 radio problem
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307

08.05.2020 17:46	# 6
BerkeKarayel
There is no need to enter code in rb3s, if your sewing embroidery needle is available, it is very simple for your mother to go to the places on the edge of the socket :)