307 please emergency assistance - 307

First of all, hello my name is the peace form I just joined 2 months ago I got a peugeot 307 xt automatic gear, there is no problem in 1 and 2 gear but if it is not tantan in 3, it makes obvious shake in 4th gear. the crankshaft sensor is defective, we changed it, then we tried it, it was good, big and then when I got on it, the car started to shake again, this is hurting me very much, I would be glad if you help me with this issue.

teacher, if the pressure pressure of the vehicle is low, if it is low, change the solenoids and the oil, the values may be the band set or the small solenoids in the brain.

Hello, I just joined you

I bought a peugeot 307 comfort 2007 model automatic gear 10 days ago

I took it to the hospital today

deviation ratio that should be 0.30 on the rear axles

0.53 output tuvturk told me to have the rear brakes checked because there is no service in my province

I took it to a master

because the disc brake is in the master, either the pad changes or the disc said

The pads opened and looked thinner, so if the thickness was 1 cm, it would have decreased to 3 millimeters.

Back pads changed for 100 TL.

the disks are solid, no problem said

He said "Use it for 3 days, go to the muanae, sit the pads, no problem"

I wonder if he made the correct diagnosis

there is a machine that measures the deviation before going to the examination

otherwise it would be canceled if it appears defective again

I would be glad if anyone who gives information that I have done is right and master is right

friends new to forum

I didn't open a new topic

I would be glad if someone with knowledge answers my question

Yes, there are metering devices in the industry for brakes, you have to enter without going to the inspection, you can have it set up in the rot-balancer and go. These are the simple things that are looked at before each examination, I don't think the master will mislead.

thank you for the information _ali_

08.05.2020 18:51	# 1
snepiister
First of all, hello my name is the peace form I just joined 2 months ago I got a peugeot 307 xt automatic gear, there is no problem in 1 and 2 gear but if it is not tantan in 3, it makes obvious shake in 4th gear. the crankshaft sensor is defective, we changed it, then we tried it, it was good, big and then when I got on it, the car started to shake again, this is hurting me very much, I would be glad if you help me with this issue.

08.05.2020 18:51	# 2
berk2309
teacher, if the pressure pressure of the vehicle is low, if it is low, change the solenoids and the oil, the values may be the band set or the small solenoids in the brain.

08.05.2020 18:51	# 4
ankaonur
friends new to forum I didn't open a new topic I would be glad if someone with knowledge answers my question

08.05.2020 18:51	# 6
ankaonur
thank you for the information _ali_

	307 please emergency assistance
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307

08.05.2020 18:51	# 3
ankaonur
Hello, I just joined you I bought a peugeot 307 comfort 2007 model automatic gear 10 days ago I took it to the hospital today deviation ratio that should be 0.30 on the rear axles 0.53 output tuvturk told me to have the rear brakes checked because there is no service in my province I took it to a master because the disc brake is in the master, either the pad changes or the disc said The pads opened and looked thinner, so if the thickness was 1 cm, it would have decreased to 3 millimeters. Back pads changed for 100 TL. the disks are solid, no problem said He said "Use it for 3 days, go to the muanae, sit the pads, no problem" I wonder if he made the correct diagnosis there is a machine that measures the deviation before going to the examination otherwise it would be canceled if it appears defective again I would be glad if anyone who gives information that I have done is right and master is right

08.05.2020 18:51	# 5
_ali_
Yes, there are metering devices in the industry for brakes, you have to enter without going to the inspection, you can have it set up in the rot-balancer and go. These are the simple things that are looked at before each examination, I don't think the master will mislead.