307 original tape

I'm thinking of having a sound system installed on my 307 2007 model car, I want my original tape to remain, but I'm tired of making a track cd. It takes 15 songs.

I had a system like Digital Audio. You attach this apparatus to the Cd changer input of your tape, providing UBS SD card and Aux input.

For audio system, you just need to install Deck converter to the tape output.

thank you .

I will have one more question 1000s of bass will make you feel outside, I would appreciate if you comment :)

The JBL 1215 feels both inside and outside with the original cabin. Of course the amp will lift this bass

I like bass in the car, brother, i have it for the first time, so i am a little ignorant sister brother verdegin thanks for the information :)

You are welcome, you can ask whatever is on your mind.

I solved the problem by just taking the self-amplified woofer without changing the original tape. As we know, there is not enough volume in the door speaker of our vehicles, bass sounds are appreciative. Without the need for a deck spinner, only the cable is pulled from the rear speaker outputs and the connection is made, giving a satisfying bass sound.

First of all, if you have a 307 who is obsessed with my friends, I do not spoil the original, but if you want to increase the sound quality a little, make the insulation of your door insulations "it is not a very costly thing", then you can replace your speakers on the doors with "higher quality components". you will receive a woofer, you will receive a medium-powered "but at least branded" amp that will feed the columns to tape or feed the bass and you will have a cable for its installation ...

If I do not isolate, the mid team will not sound good.

unfortunately, even isolation may not be enough, if the connection points of the speakers on the doors are made of pilastic, you can also make a wooden support here;

there are usb converters for original tape

how much is the average four siblings

I made it 150 liras two years ago but my car is two doors, I don't know the current prices ..

I did it to 206 myself.

I used bitüself into the door, one of which was 20cm * 10mt, one floor was enough for 4 doors
I pulled a 10mm insulation sponge under my floor, the total cost did not reach 100tl, but for a good sound, at least 2 coats should be laid.

Would it be enough if it was done only on the doors