Peugeot Forums - Peugeot Fan Club

307 LENS INSTALLATION AND HEADLIGHTING PICTURES
• Homepage » PEUGEOT MODIFIED PLATFORM » 307
08.05.2020 18:47 # 1
aokaymaz
First of all, the headlights turned yellow, I started to open the headlights because there was nothing to lose, it was a little hard to open because the headlights were gray siliconed. I opened a hole in the corner and inserted the air blowing part of the blow dryer from here, I gave hot air for 10-15 minutes (but it should be noted that the blower does not blow the air directly to the headlight because it can melt the glass etc.) It is important that the box is large. When I started wiping with a handkerchief, the headlamp's nikelages began to be removed. I did not have a problem for my feet, when the paint came out, the bottom floor turned out to be black. It took a lot of time, then I mounted the lens on the stones and it took me a very long time (I used heat-resistant silicone when sticking the lens). you will see them in the next pictures control at home both blue and red were burning great blue leds connected to the parks red leds to the fog, then I came to the mounting of the headlights to the vehicle, while the blue leds were lit in the lens, I connected it to the parks DEMON EYE, red leds in these (normally, when I tried at home, the red leds were burning alone, but the red leds were connected to the vehicle, Normally the fog was supposed to light only red because I connected it to the lamps, but when I turned on the fog in the vehicle with the fog in the system, the blue LEDs will both burn reds, and I will make sure that only the reds light up in the future. pictures taken during the day on aokaymaz2014-09-03 14:08:36
08.05.2020 18:47 # 2
aokaymaz
An important issue to be considered when friends are installing lenses
1-Using heat-resistant silicone is very important, normal silicone leaves when heated and can be flammable when the lenses get hot.
2-Before mounting the lenses on the second, the vehicle's headlights should be marked with the normal bulbs and the lighting marks against the wall, and then the lenses should be adjusted accordingly.
3-It would be nice if there was a closed garage for this, but I adjusted it on the balcony and before the silicones, the headlights should be mounted on the vehicle and the final checks should be done and everything should be closed and siliconized. Since I had no such opportunity, I had to close it without trying
4-Since the headlight motor of the right headlight is defective, I will turn on the headlights and change the lens as well as adjust the lens at a time when the lighting of that headlight is slightly above.

I will try to answer as much as I can, if you have any questions or concerns.
By the way, the lenses I use are hella bixenon lenses that come out of the 2005 lens.

08.05.2020 18:47 # 3
Alicilik
Brother when do we get my corsa hand: D

Very nice thank you.
08.05.2020 18:47 # 4
tongucuk
Thumbs UpClap
08.05.2020 18:47 # 5
tetik-soner
health to your hands .... if I understood from these electrical and electronic works, varyaaaaaaa ...
08.05.2020 18:47 # 6
Mdeniz
I hope I will dare if I have been able to dare, but we will compensate for money
08.05.2020 18:47 # 7
aokaymaz
Thank you, Ali, let us grow up a little (because the lady is not interested in us (baby)) We will handle it. We provide material support if necessary (blow dryer, soldering machine, trinkets etc. Whatever I have)
08.05.2020 18:47 # 8
aokaymaz
[QUOTE = trigger-soner] health to your hands ....

No need to understand too much electronic work if you can solder the leds
If you can connect the xenon kit too, say it's over. But fixing a little bit of lenses is trying.
08.05.2020 18:47 # 9
aokaymaz
[QUOTE = Mdeniz] I hope I could not dare, I will attempt but we will compensate for money [/ QUOTE]

Well, they want 500-600 TL to do this job, and some advertisements that I see from the owner have 599 tlye ads. There are lots of advertisements.
The lenses they wear are not going to be out of the lens
They have $ 50-60 as a kit on the aliexpress site, they take out the normal bulb, then attach the screw in the back of the lens with a small hole in the same place. So they have a ready-made kit that doesn't fix like us, they're screwing it all back.

If you want, if there is a friend who understands this job, we can bring lenses in bulk.

So it's not a very costly thing, so at least I didn't pay for lenses and covers :))

The price of the lenses and lids is around 150 TL
I bought xenon kit for 59 TL.
after d2s converter cable 2 pieces 30-35 tl
1 double d2s bulb 6000 k room around 40 TL so a total of 300 tlye malolur material

Heat resistant islikon 15-20 tl in 3-4 packages
Heat resistant spray paint for paint 20 tl
The rest is up to you
I didn't use the original xenon kit specifically because its only a light bulb of 150-200 rubles is equivalent to our set price.
08.05.2020 18:47 # 10
Alicilik
[QUOTE = not ignore] Thank you Ali, let us grow up a little (because the lady is not interested in us (baby)) We will handle it. We provide material support if necessary (blow dryer, soldering machine, trinkets etc. Whatever I have) [/ QUOTE]

I know, brother, I said a joke, five important things. The only trouble is to remove the headlight from the window. The rest will be very easy.
08.05.2020 18:47 # 11
aokaymaz
[QUOTE = Alicism] [QUOTE = not ignore] Thank you Ali, let us grow up a little (because the lady is not interested in us (baby)) We will take care of you. We provide material support if necessary (blow dryer, soldering machine, trinkets etc. Whatever I have) [/ QUOTE]

I know, brother, I said a joke, five important things. The only trouble is to remove the headlight from the window. The rest will be very easy.
[/ QUOTE]

The room is easy Ali, we bought a baby car and car seat for her baby, her box was big enough, I put the shadow in that cardboard box, then I laid the box on the side and made a hole enough to enter the mouth of the blow dryer, it was easy to remove silicone softened for 10-15 minutes from there.

Soon I will put that box in the announcement Wacko (as a clean stroller box from the owner :))))
not aokay 2014-09-03 17:18:50
08.05.2020 18:47 # 12
Adem Kurtuldu
the lens becomes more beautiful than the original with the blackout and also the health of your hand is very nice Smile
08.05.2020 18:47 # 13
samet206
Well-behaved blue colored headlight dimming to your hand health ...
08.05.2020 18:47 # 14
Candogar
I hope it is very nice ... a friend I know has a headlight engine. I told him, he said, let me determine the price. headlight motor 1 pair I can give the phone number specially if you think to buy it.

note: headlight motors from the original headlamps of 307 Candoğan is 2014-09-04 02:56:46
08.05.2020 18:47 # 15
aokaymaz
[QUOTE = Candoğar] thank you very nice ... a friend I know has headlight engine. I told him, he said, let me determine the price. headlight motor 1 pair I can give the phone number specially if you think to buy it.

note: headlight motors from the original headlamps of 307 [/ QUOTE]

Thank you, I would be glad if my brother sends a picture of the headlight motors to my e-mail address. (Kaymaz40@mynet.co)

I have a lot of headlight motors in my hand, I bought it from the same brand in me, while it lifts up on the original headlight of the vehicle, it makes me go down. In other words, they are moving in different directions. I dismantled the defective engine of the vehicle. I applied electricity to the engine inside. It was not working on the vehicle. Maybe there is a problem with its cable. If not, I will wear two of the solid ones in my hand, both move in the same direction and remove the original one of the vehicle (I say, the original one in the vehicle and the engines I installed are not the same brand sub-industry)

I would be glad if he still sends a picture.

Thank you guys for your nice comments
08.05.2020 18:47 # 16
aokaymaz
[QUOTE = samet206] Well done blue dimming headlights that look good in your hand health ...
[/ QUOTE]


Thank you brother, I think if the vehicle was white gray or red, it would be better.
08.05.2020 18:47 # 17
reality59
Nice brother Ali looks more handsome than mine :)
08.05.2020 18:47 # 18
Candogar
[QUOTE = aokaymaz] [QUOTE = Candoğar] thank you very nice ... a friend I know has headlight engine. I told him, he said, let me determine the price. headlight motor 1 pair I can give the phone number specially if you think to buy it.

note: headlight motors from the original headlamps of 307 [/ QUOTE]

Thank you, I would be glad if my brother sends a picture of the headlight motors to my e-mail address. (Kaymaz40@mynet.co)

I have a lot of headlight motors in my hand, I bought it from the same brand in me, while it lifts up on the original headlight of the vehicle, it makes me go down. In other words, they are moving in different directions. I dismantled the defective engine of the vehicle. I applied electricity to the engine inside. It was not working on the vehicle. Maybe there is a problem with its cable. If not, I will wear two of the solid ones in my hand, both move in the same direction and remove the original one of the vehicle (I say, the original one in the vehicle and the engines I installed are not the same brand sub-industry)

I would be glad if he still sends a picture.

Thank you guys for your nice comments
[/ QUOTE]

I forwarded to him and will return to you.
08.05.2020 18:47 # 19
aokaymaz
Ok thanks
08.05.2020 18:47 # 20
PUG307BYE
hello how can i clean the headlights that dull from the sun.
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”