307 interior lighting colors recommended

I think about the mileage and speed indicators:

I think you should make them all the same color. For me, the most beautiful is the white, that is, as you show in the second picture. But this is completely up to your own taste.

Are you sure that you have put the cables and lamps in place? Does the text appear on the screen even if it is faint?

I love white too, I think the mileage indicator is white but it is the last job because the smd led diode change requires a lot of fine workmanship in the example: http://www.peugeotforums.com/forums/interior-55/part-2-307-blue-interior-lights -6467 /

Did you install a different lamp than the bottomless lamp?

I haven't changed the lamp yet, I just replaced the orange strip on the background, put white paper. I did not intervene other than that. I'm going to get the lamps tomorrow or put them on. I suspect the fuse because I did not remove the terminal before removing the lcd socket. I also suspect one more thing; Before removing the socket, the harness was tied to a point behind the screen with a clip & nbsp; & nbsp; on the back of the clip, I had to hang a little bit of the cable. I wonder if the socket on the other end of the cable is not the socket on the screen end, is it disconnected or played?

re-insert the orange strip, I think ... I think there is a lack of contact in that part ... it is unlikely, but what kind of light bullet you installed might be + - incompatibility ....
for example, if you put the bulb of the map lamp upside down it doesn't burn & nbsp;

Let's try the bulbs one by one and let's check the socket of the green electronic circuit board in it also ...

I just tried all of them one by one, changing their directions by + - and - +, and none of them are burning. most likely, the bulbs burst and disassemble. I looked at the screen with the light of the phone and the information comes. screen works. but no light is on. green circuits or lights ...

I think your bulbs burst .. I'm glad there is no bigger problem

tomorrow & nbsp; I will go out after school at noon and try a white and blue of these light bulbs from an electronic electronics industry. I will also check the old bulbs. if not for the right electronics shop ...

problem bulbs burst. I replaced it with white light bulbs now it is on. Okay a question: I wonder if he can suggest the orange strip feature white background material? coated paper? handmade paper :) oil painting paper? glossy cardboard paper? say what?

[QUOTE = colonel] problem bulbs burst. I replaced it with white light bulbs now it is on. Okay a question: I wonder if he can suggest the orange strip feature white background material? coated paper? handmade paper :) oil painting paper? glossy cardboard paper? How about it? [/ QUOTE]

Glass part of the lamps are not touched by hand. Maybe your lamps have exploded because of this.

In the example of changing the color of the indicator panel in the link above, there is also a form applied to the computer screen. Link to the possibility that you may not have seen:

http://www.peugeotforums.com/forums/interior-55/part-1-307-blue-interior-lights-6456/

You Will See Translucent filter, in other words, a translucent filter was used in the project.
koliva 2012-02-11 14:59:58

In fact, that filter & nbsp; caught my attention & nbsp; a lot & nbsp; but since I could not know where to sell it, and also because I could not find the same color or white of the bulbs in us, I gave up the project and returned to the original color for now. I pasted the orange strip instead and now the original is OK :)

maybe this link can guide you a little bit;

a nice guiding & nbsp; title suggestion & nbsp; thank you. a simple method. can easily do what's handy. I chose to stay original for now, but keep this in mind if I think to change it in the future.

first of all hello i am a new member i want to try this color changing work but i am afraid that it will be too light to have old or orange leds 1.8 v white 3.4 v blah blah but i would be glad if you help.

Our newly registered members are required to introduce themselves first, as stated in the link below. nu-read-from-read "target =" _ blank "rel =" nofollow "> http://forum.peugeotturkey.com/forum_posts.asp?TID=7516&title=new-yers-cautine-contact-not- read < / a>

Which one are you talking about as orange led? It is located on the back of the trip computer from bottomless lamps. The orange film that shows the screen is the orange film in between. If you are calling Kadrani, the article about that topic would be in the forum.

I think it wouldn't be a problem if I remove the leds on the dial and connect a white led without connecting resistors.