Peugeot Forums - Peugeot Fan Club

307 high beam and fog

Homepage » PEUGEOT MODIFIED PLATFORM » 307
08.05.2020 17:08 # 1
blinddark
think about how you make a selector if you connect the xenon to the long headlight, so it is late, in my 307, the fog lamps were on after the dipped headlight, when I removed the headlights the other day, I cut the wires of the fog and blinded, I pulled the parallel wires from the parking lamp wires, connected it to the wires of the fog lamp, now the park is burning in the fog at the same time during the day and I recommend it very late at night, I can only go with the fog light when I go on the road in the evening.
08.05.2020 17:08 # 2
muro_60
[QUOTE = blinddark] If you connect the xenon to the long headlight, think about how you will make the selector. After all, it is late. In my 307, the fog lamps were on after the dipped headlamp. I disconnected the headlights the other day. It is burning at the same time during the day and late, I recommend it. I can only go with the fog lighting when I go on the road in the evening. Now I think to buy and install a white light bulb that gives white light.
08.05.2020 17:08 # 3
alcolique
If you make xenon lengths, you will have problems in the selector. Because xenon bulbs do not give full performance without warming up. Therefore, companies have developed bi-xenon technology. You can think of this system as an eyelid. There is a lens system in front of the bulb that can be opened and closed very quickly, so the headlight is not expected to warm up or cool down. When you make a seller, that lens goes up and down.

You can have lenses applied to your headlights, but I think the cost will be high.

Regards .. .
08.05.2020 17:08 # 4
fatihgg
Tuesday, long xenon is not healthy.It does not shine immediately.With a good halogen, we will get a better value.
08.05.2020 17:08 # 5
impact
Do not use lensless xenon, brother is very eye-catching. also in 206 friends, please don't burn their back fog
08.05.2020 17:08 # 6
blinddark
[QUOTE = muro_60] [QUOTE = blinddark] If you connect the xenon to the high beam, think about how you will make the selector a little bit, then it is late. In my 307, the fog lamps burned after the dipped headlamps. I connected it now the park is burning in the fog at the same time in the daytime and late, I recommend it. I can only go with the fog lighting when I go on the road in the evening. Don't burn the cable [/ QUOTE] I am an electric master. I used 2x1.5 outer insulated cable. If 55w high amperage does not draw anyway, it would be a problem due to heat, so I used externally insulated cable, but if I did not have a macaron, I will get a macaron as soon as possible. 1 meter blue cable works on two headlights
08.05.2020 17:08 # 7
impact
[QUOTE = 307 bursa] [QUOTE = impact] Do not use lensless xenon. also in 206 friends please don't burn their back fog [/ QUOTE]
let my brother think about it:) & nbsp;
brother, I think you have a problem in your eyes. you go to a doctor, emrahim :)
08.05.2020 17:08 # 8
muro_60
I am a master of electricity, 55w approximately 4.5 amperes will heat in the long term. I recommend you to install the relay on the battery. You should pull the battery from the battery with a 4-cable cable.
08.05.2020 17:08 # 9
blinddark
I just took my cell phone in cloudy weather
& nbsp;
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0447 .jpg
http : //i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0442.jpg
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0440-1.jpg
< a href = "http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0441.jpg" target = "_ blank" rel = "nofollow"> http: // i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0441.jpg
& nbsp;
blinddark 2012 -11-07 13:10:03
08.05.2020 17:08 # 10
blinddark
[QUOTE = 307 bursa] [QUOTE = blinddark]
I just took a mobile phone in cloudy weather
& nbsp;
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0448.jpg
http: // i1147. photobucket.com/albums/o543/blinddark/Foto11F0raf0447.jpg
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0442.jpg
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0440-1.jpg < / a>
http://i1147.photobucket.com/albums/o543/blinddark/Foto11F0raf0441.jpg
& nbsp;
[/ QUOTE]
look, this application is beautiful, I think it would be better if we made white in yellow light. We will use it with xenons ...
Thank you for the opinions, thank you guys. div>

[/ QUOTE]
from the real pictures & nbsp; Make it look more beautiful, your headlights will look better than you.
08.05.2020 17:08 # 11
fatihgg
[QUOTE = 307 bursa] is the easiest and simplest application to try and share the pictures. they are like headlights but there is no space for bulb bulbs on the back side. Does anyone have any information?) & nbsp;
08.05.2020 17:08 # 12
muro_60
My mine is burning in the parks when it burns the fog. try the pole switch button

08.05.2020 17:08 # 13
koliva
[QUOTE = 307 bursa] What if I asked a electrician friend about attaching these fog to the parks? You can only drive with a role.
08.05.2020 17:08 # 14
muro_60
[QUOTE = 307 bursa] [QUOTE = muro_60] I am burning in parks when my fog burns in the parks. try the light fog button

[/ QUOTE]
unfortunately there is no fog button in our vehicle :(
how the fog is burning.
08.05.2020 17:08 # 15
okan4037
I made long xenon but it doesn't necessarily illuminate the road without warming up, it only gives direct way because it bursts in selectors.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”