Peugeot Forums - Peugeot Fan Club

307 HEATER FAN PROBLEM (SOLVED)

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 18:23 # 1
muhoist
Friends first hello to everyone 2 days ago the heater fan of the car started to stop working. When I parked the car until the evening and turned the fan button when I came back, this time it worked. all the lamps in the place where the heating buttons are on, the air conditioning button is working, the resistor is working, so I assume that the fuse is not blown. muhoist 2014-03-23 21:28:43
08.05.2020 18:23 # 2
muhoist
anybody have an idea?
08.05.2020 18:23 # 3
muhoist
Can I clean the panel myself, and is it easy to remove it?
08.05.2020 18:23 # 4
ynusemre
The plastic socket of the sibling fan cables melted. The same happened with me.
08.05.2020 18:23 # 5
308_CC
Hello
The same fault has occurred in my vehicle, never go anywhere from the secret because it's a waste of time. I took my car to many electricians, but eventually I took it to a company called ..... This company was first established in Turkey and air conditioning company already had determined that the air conditioning all the fault of my car parts company in Turkey. They made my fault at one third of the price requested from me in the service and I still use it. you can look at the right place in these works ..........
If 307B 2014-03-20 10:21:15
08.05.2020 18:23 # 6
muhoist
thank you everyone for the answers guys started working on my own again i did not understand the reason why it is okay if it fails again then i will take it, i think it would be wrong to disassemble one side now.
08.05.2020 18:23 # 7
ismailkaya
I said that the service will change completely, I said I don't have the alternative, I said 100 TL, they said it was the fault.
08.05.2020 18:23 # 8
muhoist
The same problem is mine, but if you are gone, it is not going to go completely.
08.05.2020 18:23 # 9
emirhan307
may be getting chassis
08.05.2020 18:23 # 10
muhoist
Friends, the heater broke down again, I had it done by the electrician yesterday, I wanted to write the problem to shed light on the friends who faced this kind of malfunction, according to the electrician, the fan stage had a resistance, it was burned, it was disconnected and it was straightened. Also, the screen of the tape screen recently seemed lifeless, it was a coincidence that after repairing the fan, I thought the screen was completely gone, I disassembled it, and I saw that one of the three lamps on the back was on, only when the room bursted, the light was gone, and when they renewed the three lamps, the screen returned to its brightness as the first day. . Hopefully, nobody will encounter such problems, at least if they do, they will have an idea from here.
08.05.2020 18:23 # 11
KIZILASLAN
I do not work at level 4, what is my problem?
08.05.2020 18:23 # 12
ahmed206
I had a similar problem with the signals and the horn, and the men had solved it with a contact spray. If such parts are working and not working, they may have oxidized, rust remover sprays may work.
08.05.2020 18:23 # 13
palarec
[QUOTE = muhoist] Guys, the heater was broken again yesterday, I had it done by the electrician yesterday, I wanted to write the problem to shed light on the friends who faced this kind of malfunction, according to the electrician, the fan stage had a resistance, it burned, it was straightened and it was fixed. Also, the screen of the tape screen recently seemed lifeless, it was a coincidence that after repairing the fan, I thought the screen was completely gone, I disassembled it, and I saw that one of the three lamps on the back was on, only when the room bursted, the light was gone, and when they renewed the three lamps, the screen returned to its brightness as the first day. . Hopefully nobody will encounter such problems, at least if they do, they will have an idea from here. [/ QUOTE]

Where is this resistance? I have the same problem with me, the fan does not work at all. I checked the sockets but it is solid.
08.05.2020 18:23 # 14
muhoist
stays behind fan buttons when torpedo is removed

08.05.2020 18:23 # 15
307Mster58
[QUOTE = dehsetilyo] does not work in level 4 of mine, what is my problem? [/ QUOTE] 1.2.3. at the stages, the engine does not start, the air comes directly.

08.05.2020 18:23 # 16
KIZILASLAN
[QUOTE = 307Mster58] [QUOTE = dehsetilyo] does not work in level 4 of mine, what is my problem? [/ QUOTE] 1.2.3. at the stages, the engine does not start, the air comes directly.

[/ QUOTE] Would the engine not start, I turn it on when the vehicle is parked, blows the fan at 1.2.3 and gradually increases the speed
08.05.2020 18:23 # 17
palarec
[QUOTE = 307Mster58] [QUOTE = dehsetilyo] does not work in level 4 of mine, what is my problem? [/ QUOTE] 1.2.3. at the stages, the engine does not start, the air comes directly.

[/ QUOTE]
The fan works at all levels. Normally, there is no electricity in the fan fuse.
25.01.2021 19:30 # 18
Selocan7874
How is the fault solved?
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”