307 headliner and door trim

Hello friends, the car that tried to cut and paste it because the previous owner was sagging on the ceiling, the ceiling was full of holes, I wish it would be nice if I had a photo. It has been 2 months now and nothing has happened like sagging etc. As a result of some efforts on the ceiling floor that the center is curious about, I finished it in advance, but since I did not have the opportunity to take a picture, it was the first day. All the screws are in the car that has torque. first of all I have removed, the blinds are holding 2 screws already and they do not force the nails can be broken, I broke one of them. Afterwards, you can unscrew the screws on the ceiling handles on the door very quickly :) With the help of a charger, you can unscrew them by inserting a screwdriver between them. And I removed the front lighting and backlights on the ceiling and completely wasted, the ceiling does not fall down. Since there are places on the edge of the door plastics, save from the door plastics downwards from the cover of the luggage cover and the ceiling will fall down. The thing to be careful about here is that the fiber with the fabric will be trying to avoid damaging it as much as possible. With the ceiling fiber we removed, it will come quickly and easily as there is already a spongy thing under the edge of the cloth where it will be applied. it's up to your skill. I bought, 2.5 meter ceiling fabric (from Ankara unfailing upholsterers) 80 TL1 kilo bali glue is already available in them 20 TL Wire brush 5 TL Brush to be used for adhesive 5 TLTotally cost 110 TL, I bought it from thick fabric with sponge, if you want, the price is more affordable You can get them from the fabrics, but you should be careful not to let the adhesive out in the excess. I scrapped the spongy thing under the removed fabric with a wire brush. It took about half an hour.After cleaning it from the sponge pieces, I started to apply the back from the back part, I think you are doing the operations outside or in a place that you do not use (the smell of the balin is very difficult from the house) I waited for a little bit to stick the back part which is half a meter but the feature of the whale is to dry late and He had to keep me fully dry to make stretching. I used the blow dryer for this. I kept it for 30 seconds on medium temperature with medium air, and then I came to the place where I applied it by sticking the fabric behind the ceiling plate. Let's not be nice to smear your hands. Let's remove the frame around the door handles after removing the glass opening keys. In the part where the mirror is located, we are pulling towards ourselves in a place like a cover. After unscrewing all the screws of the door plastic, we slowly lift it upwards to get rid of the place where the glass is located and it is wasted. The bad place here is the plastic part like the flooring of the door, by heating it to the door itself. I used my first choice due to the fact that I had a weight of 1 kg. I separated the plastic with a flat-cut screwdriver from the heated place. I removed the plastic and removed the parts. I covered it in the same way. I was very writing, guys, sorry, I wanted to write down to the finest details. I would like to thank my spouse, Yücel brother and son who contributed to the subject :)

Health has been a nice work.

Congratulations on your hand, very clean work like zero But I suppose I'd make black alcantra on the ceiling and leather on the doors. Mine is leather. Of course it's a matter of taste.

[QUOTE = BLACK LION] Congratulations on your hand, very clean work like zero But I suppose I'd make black alcantra on the ceiling and leather on the doors. Mine is leather. Of course it's a matter of taste.
[/ QUOTE]

Thank you very much for sharing.

[QUOTE = ggitaristt] Thank you very much for sharing ..
[/ QUOTE]

Well, my brother and sister, I have a good hand on my hands.

When @sonerkyl gives some effort, good things come out. I try to help as much as I can. If we arrange something for a picnic style, we will handle it when we go there in the forum :) 2 hours of your upholstery.

I hope I can see the weather get hot in my mind, samovar barbecue

As you see health applications like this, I am going to change the flooring in me but I do not trust myself so that I will ruin :)

It is not very difficult, teacher flooring, more difficult was to change the seats, together with the airbagler :)

your job is suitable for this job

[QUOTE = pepecura] your job is probably right for this job [/ QUOTE]

Nice work

I did not dare to hang the ceiling of 307 in myself, after reading them to change myself, I got a blast of courage self-confidence:)

If there is a problem that you have in mind, I will try to answer it in summer through my teacher forum.

[QUOTE = ruhel A] [/ QUOTE]

Your health is very good. Did you also remove the white plastic coverings on the inside?

[QUOTE = df3210] [/ QUOTE]

[QUOTE = seduray] Good health to your hand. Did you also remove the white plastic coverings on the inside? [/ QUOTE]