Peugeot Forums - Peugeot Fan Club

307 HDI Front Brake Pad Replacement?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 14:56 # 1
dbmaster
I wish everyone good evening, my car went to the industry to replace the 2006 307 HDI Premium 110HP front brake pads today. The brake pads are over, the brake discs should also be grinded. The master was grinded.

Remsa balata 65 TL
Disc grinding 15 TL
Stripping workmanship 30 TL

Total: 110 TL, this work was done by vehicle ESP

Do you think these prices are good and Remsa balata is the best quality?

The price for the rear brakes is:

I'll get them back for up to 1 month

Remsa back pads: 30 TL
Disc Grinding 15 TL
Stripping workmanship 30 TL

Total: 75 TL

How is the price material friends ...
08.05.2020 14:56 # 2
furkan
I think the price is very good
08.05.2020 14:56 # 3
Guests
good
best wishes
08.05.2020 14:56 # 4
dbmaster
I am relieved, thanks, friends, I do not trust anyone.

well remsa is a good brand my friends
08.05.2020 14:56 # 5
oguzhan29
yes the prices are very nice
08.05.2020 14:56 # 6
coyote26
the price is nice but if you measure the thickness of the discs I do not recommend to the ones who are not too thick. Stone it to me.
08.05.2020 14:56 # 7
Guests
friends, is there any information about how this disk grinding is damaged?
08.05.2020 14:56 # 8
dbmaster
[QUOTE = coyote26] the price is nice but if you measured the thickness of the discs I do not recommend tagging those who are not too thick I said grind me I looked, I went thin, I took a new one and put it on, the ruptures cracked after 1 week :) Brake does not violate this [/ QUOTE]

You are right, my friend, but the brideship was not done beautifully, it was made after my death in the braker. There was a one-time share in it, we even used it once in the back of the graft to be done in the back, so it is very dangerous to head it off like I thought.
08.05.2020 14:56 # 9
dbmaster
[QUOTE = LANOPE] friends, do you have any information on how this disk grinding is damaged? [/ QUOTE]

Disc grinding is not harmful, useful, of course, if it is necessary, for example, if your vehicle brakes at high speeds, if there is shaking, these discs are welded and there is deterioration. If it is done, it will lead to clashes, which will be unpleasant, so let's get the approval after the measurement.
08.05.2020 14:56 # 10
ali oncu
I think the prices are quite affordable
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”