|
|
|
|
307 Glass Grid IS THE SOLUTION! |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 20:13 | # 1 |
 Peugeot35 |
|
|
Almost all of the 307s I look at is obviously a chronic problem, and because of this problem, it enters through the bonnet and spreads all over. There is a part sub-industry, but I think the room will be the same in the following days. Get This Price  http://www.peugeotmarket.com/peugeot-307-on-cam-ızgarası-orjınal,pr-2545.html
|
|
| 08.05.2020 20:13 | # 2 |
 Gokcesel |
|
|
There are also small spills in my vehicle, they are not separated from the glass, but it does not pose a problem for me. The price is also maşallah :) Take a look at the publisher, you may come across more suitable.
|
|
| 08.05.2020 20:13 | # 3 |
 BLACK LION |
|
|
Don't worry, I have too. If it is very striking, take it with fine sandpaper and make those roughness so simple.  |
|
| 08.05.2020 20:13 | # 4 |
 dejawu1978 |
|
|
I was not very fond of the subject, but I think they go to the bumpers that have been deformed and broken in fiber, they are doing exactly the same as they were .. |
|
| 08.05.2020 20:13 | # 5 |
| Peugeot35 |
|
|
[QUOTE = Gokceel] There are also small spills in my vehicle, they are not separated from the glass, but it does not pose a problem for me. Maybe the price is also :) Take a look at the publisher, maybe you can come up with a suitable one. [/ QUOTE] 80% exist in all 307s, even if it is in the implicit, it has the same problem. because it is a chronic problem.
|
|
| 08.05.2020 20:13 | # 6 |
| Peugeot35 |
|
|
[QUOTE = BLACK LION] Don't worry, I have too. If it is very striking, take it with fine sandpaper and make those roughness so simple. [/ QUOTE] I was surprised if not unfortunately it poses a problem. Water enters the hood, unless the wick of this grille is attached to the glass. I suggest you open and look after a hood after the rain, especially the spare water tank and the hood fuse box are leaking there. no need to sandpaper wick spontaneously. chronic problem.
|
|
| 08.05.2020 20:13 | # 7 |
| Gokcesel |
|
|
[QUOTE = Peugeot35] 80% exist in all 307s, even if it is in the implicit, it has the same problem. because it is a chronic problem. [/ QUOTE] I suggested the publisher to say that it may be clear, of course it does not make sense to take it in the same way.
|
|
| 08.05.2020 20:13 | # 8 |
| BLACK LION |
|
|
Does Szde play the whole piece through his head, though he is screwed from right to left? There is a fine click sound coming in. I couldn't find it for a long time. Yesterday I even changed the z rods steering wheel to cut this sound. Do you have this? |
|
| 08.05.2020 20:13 | # 9 |
| Peugeot35 |
|
|
[QUOTE = BLACK LION] Does Szde play like a piece along the length, even though he is screwed from right to left? There is a fine click sound coming in. I couldn't find it for a long time. Yesterday I even changed the z rods steering wheel to cut this sound. Do you have this? [/ QUOTE] No, it doesn't play hard, but you can stretch it with your hand. If there is a play, you may not hold the wick well. If you want to see the wick that the bonnet adheres to. |
|
| 08.05.2020 20:13 | # 10 |
 ruhela |
|
|
If you want a problem for a glazier, they glued this piece to the glass with silicone. + One of the breathability spots in me was missing, I asked the previous owner, they said they had removed it for the sound system and they couldn't wear it again.
|
|
| 08.05.2020 20:13 | # 11 |
| BLACK LION |
|
|
When the parts entered by the glass move with my hand, they play and make a voice. Do you normally adhere to this place? Because the service for the air filter removes it. Or it can be done with double-sided tape, for example. |
|
| 08.05.2020 20:13 | # 12 |
| Peugeot35 |
|
|
[QUOTE = BLACK LION] When the parts of the glass play with my hand, they play and make a sound. Do you normally adhere to this place? Because the service for the air filter removes it. Or it can be done with double-sided tape, for example. [/ QUOTE] My teacher, yours may be slack, normally it shouldn't be playing. Water is entering the engine. If you say grill or not, that piece is both very expensive and very bold. I am going to do the revision myself, and I went to a lot of glass makers, we said we can not do anything.
|
|
| 08.05.2020 20:13 | # 13 |
| BLACK LION |
|
|
Okay easy come i follow |
|
| 08.05.2020 20:13 | # 14 |
| mustym16 |
|
|
The same problem exists in me. Could you solve the problem?
|
|
| 08.05.2020 20:13 | # 15 |
 emretprmz |
|
|
I recently disassembled the grill and pressed half a tube of silicone, to the parts where both the plastic and the plastic and the glass touched the gasket and the plastic. I also lubricated. |
|
| 08.05.2020 20:13 | # 16 |
| Brkglc44 |
|
|
I am thinking of doing the same thing. How is the situation?
|
|
| 08.05.2020 20:13 | # 17 |
 pusutr |
|
|
[QUOTE = emretprmz] Recently I disassembled the grill and pressed half a tube of silicone, to the parts where both the plastic and the glass and the gasket touched the gasket and the plastic. his arms etc. I also lubricated. [/ QUOTE] Processing with proper craftsmanship makes sense. The black dyson adhesive looks logical. I think it will work for a long time. I will do the same to my vehicle soon.
|
|
| 08.05.2020 20:13 | # 18 |
| Kirazpeugeot |
|
|
I had the same problem in my car, it was too hard on my head, I sent the car to change the oil from my cousin.
|
|
| 03.01.2022 19:14 | # 19 |
| cemakkartal |
|
|
Hi. In my vehicle, both the grill itself has cracks and the connection with the glass seems to have completely melted away. What I was wondering is, if I buy the grill, does it come with the wick? Because I just looked for the wick but couldn't find it either. If the grille and wick are one piece, I can do it that way. |
|
| 04.01.2022 09:04 | # 20 |
 sonerkyl |
|
|
The wick is on it, sir. There is no problem with that. If you only say wick, there is z wick, sir. You can practice it yourself.
|
|