Peugeot Forums - Peugeot Fan Club

307 gear rope

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 15:26 # 1
spilmac

Hello friends. I have a 2002 model 1.6 Xr a 307. the gear of my vehicle was too hard. I took it to a master just to have it looked since there was no service at my location. said there is a problem with the master gear ropes.

I wonder what this gear rope replacement costs? how serious is the problem?

08.05.2020 15:26 # 2
oguzhan29
As per the rules of the forum, first introduce yourself from the introduction section, then knowledgeable friends will help you
08.05.2020 15:26 # 3
Guests

If you want, our sponsor will send you ropes with our brother Murat. you can have a suitable master there ... if you have detected the euphoria in full, of course :)

the cecol 2011-05-20 11:48:02
08.05.2020 15:26 # 4
spilmac
so the problem is in the rope here. I need information about the size and cost of the problem.
08.05.2020 15:26 # 5
Guests
I guess I would like to assume it would not exceed 50 lira. but I have no idea about the price of the ropes
08.05.2020 15:26 # 6
sahin-peugeot
price of rope 320 tl
08.05.2020 15:26 # 7
Guests
Murat brother, do these ropes come together with the mechanism under the gear lever, or are they just ropes?
08.05.2020 15:26 # 8
ismail ozdemir
what's wrong with this rope? I have a 307 xt from 2002 r when I suddenly switch to the d position, the gear triptonik goes there and stays stuck there and n writes on the screen.
08.05.2020 15:26 # 9
Guests
[QUOTE = beyazzzzz] what's wrong with this rope? I have a 307 xt from 2002 r when I suddenly switch to the d position, the gear triptonik goes there and stays stuck there and n writes on the screen.
you are automatic but i think your friend's vehicle is straight gear
08.05.2020 15:26 # 10
sahin-peugeot

cem brother comes complete

08.05.2020 15:26 # 11
emrnl
It shouldn't be so expensive. I changed the pressure pad of my car, because it could not be compatible with the new pad, the wire broke off, I called the tow truck or something, I gave the bidet 80 TL, also I gave 55 TL on the original wire for 206. I don't know the same thing.
08.05.2020 15:26 # 12
Guests
[QUOTE = emrnl] shouldn't be so expensive. I changed the pressure pad of my car, the wire broke off because it was not compatible with the new lining.
ABOUT, heat stirring Gülme
we are talking about ropes together with the gear console. but you are talking about the detour wire. irrelevant things.
In 206, the gear is not roped. It works with metal arms and cubes like old ones.
but 307 and 207's Japanese auto ropes like spiral tether ...
08.05.2020 15:26 # 13
emrnl
When you do it, brother will surpass me :)
08.05.2020 15:26 # 14
sahin-peugeot
Gülme
08.05.2020 15:26 # 15
Guests
Oh, let's not stir the bro to the corbaya, then we can not get out of the heat. Sırıtma
08.05.2020 15:26 # 16
spilmac

friends, our problem with rope is water;

Once the gear is very hard. There is a lot of trouble in the passes. sometimes they get stuck. its most prominent feature is that it is very hard.

08.05.2020 15:26 # 17
spilmac
don't have to help :(
08.05.2020 15:26 # 18
ose

My friend will write someone your model from signature control panel to signature section. Keep up to date.

08.05.2020 15:26 # 19
ose
If you have ever changed the gearbox oil, it can sometimes decrease oil.
08.05.2020 15:26 # 20
beveta
There is a pin at the point of passing the gearbox to the gearbox rather than the rope. A pin with a length of 2.5 cm and a diameter of 7 mm, this pin loses its spring feature over time. When we lose the spring feature, the pin comes out slowly, the same problem was present in me ... difficult nights etc ... one day I'm going on the road, I got stuck in my hand, the gear lever ... I got the 3rd and 5th gear in the car ... I went to a mechanic nearby by chance, I have to download my gear ... I said to the mechanic, I will be polite in this job. how did i load the night, i got help with the way i brought it to the hammer pin 2 lira something i took friends do not click ... get past ...
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”