|
|
|
|
307 flywheel and clutch kit idea |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 15:13 | # 1 |
 Faruk |
|
|
My 98 thousand vehicle is shaking at take-offs and the shaking is less than 2000. It is likely that the flywheel and clutch lining will change, but these 110-hp threads that have been previously read and discussed in the forum have spring-loaded flywheel, but those that have provided more fixed and fixed fixed flywheel for 90 hp. It was said to be shouted. Whether the flywheel is fixed or spring loaded. About the price including workmanship of the flywheel and clutch lining completely I am waiting for the opinions and suggestions of friends who are knowledgeable and experienced in this regard. |
|
| 08.05.2020 15:13 | # 2 |
 ask307 |
|
|
I know that the printing will change the pad and the volant won't change easily.
|
|
| 08.05.2020 15:13 | # 3 |
| Faruk |
|
|
[QUOTE = ask307] press brake changes the flywheel does not change easily I know [/ QUOTE] construct. it happens like you say but I know this trembling event is from volant |
|
| 08.05.2020 15:13 | # 4 |
 sahin-peugeot |
|
|
Hello there, You will have to replace the flywheel and clutch completely, the flywheel hub is easy to break, The price of the flywheel + clutch set is 750 TL (original) but if you want a fixed flywheel, the price with the clutch set is 800 TL (original) excluding workmanship But I recommend you to use the original pivoting hub flywheel that comes out in your vehicle, as you said, they change it afterwards and attach it fixed, but I am for the original.
|
|
| 08.05.2020 15:13 | # 5 |
| Faruk |
|
|
[QUOTE = Sahin-Peugeot] hi You will have to replace the flywheel and clutch completely, the flywheel hub is easy to break, The price of the flywheel + clutch set is 750 TL (original) but if you want a fixed flywheel, the price with the clutch set is 800 TL (original) excluding workmanship But I recommend you to use the original pivoting hub flywheel that comes out in your vehicle, as you said, they change it afterwards and attach it fixed, but I am for the original. [/ QUOTE] thanks for your comments and help. I will ask this fixed or spring volant job when I go to the bidet service. Let's see what they will say.
|
|
| 08.05.2020 15:13 | # 6 |
 cerci07 |
|
|
[QUOTE = Sahin-Peugeot] hi You will have to replace the flywheel and clutch completely, the flywheel hub is easy to break, The price of the flywheel + clutch set is 750 TL (original) but if you want a fixed flywheel, the price with the clutch set is 800 TL (original) excluding workmanship But I recommend you to use the original pivoting hub flywheel that comes out in your vehicle, as you said, they change it afterwards and attach it fixed, but I am for the original. [/ QUOTE] I have the same problem in my vehicle. Let's say that I am thinking of continuing until it breaks down in this way. What brand and price is included in the volant, which has a movable core? finally, how many thousand km of this part's shoulder? thanks for your reply in advance |
|
| 08.05.2020 15:13 | # 7 |
 semih |
|
|
Get well soon
|
|
| 08.05.2020 15:13 | # 8 |
| mdincer34 |
|
|
it also trembles in 307 too, it is incredible on check-out but the check is good, so if I say clutch is over, it is unfinished traction is good but it shakes until it gets up, even when I release the clutch without gas I do not understand it, I do not know what to do until I go to the place where it goes. |
|
| 08.05.2020 15:13 | # 9 |
| ask307 |
|
|
I called friends service 1.4 hdi 307s all fixed flywheel tremor only made from pressure tremor pressure disappeared when the pad changed.
|
|
| 08.05.2020 15:13 | # 10 |
| cerci07 |
|
|
I know the 68 and 90 hp fixed flywheel is 110 hp and the upper spring flywheel.
|
|
| 08.05.2020 15:13 | # 11 |
| mdincer34 |
|
|
then I think that if I change the car to 1.4 68 hp pressure pad, the tremor will disappear.
|
|
| 08.05.2020 15:13 | # 12 |
| mdincer34 |
|
|
our sponsor falcon peugeot 307 1.4 hdi 2004 model printing pad org. What is the price?
|
|
| 08.05.2020 15:13 | # 13 |
| mdincer34 |
|
|
?
|
|
| 08.05.2020 15:13 | # 14 |
| furkan |
|
|
http://www.youtube.com/watch?v=dbvp5evpub to click the link follow There is no pressure in the flywheel system. The pressure springs are in the flywheel. c4110 hp c5 110 hp all of the problematic zero vehicles almost all of them have been changed at least 2 times the warranty has been made of very ordinary material. This flywheel is used to minimize the vibration of the engine and provides take-off like cotton. It was first applied in buses and trucks. The worst thing is that the springs are completely dispersed and the vehicle does not walk, but the fixed price of 2.0 hdi can be taken and fixed but the price of this flywheel is 800 TL. transfer kit cost resource 20 tl printing pad set 300 tl labor 100 tl total 420 tl more volant problem is eliminated. |
|
| 08.05.2020 15:13 | # 15 |
| ask307 |
|
|
[QUOTE = mdincer34] our sponsor falcon peugeot 307 1.4 hdi 2004 model printing pad org. What is the price? If I come to you, do you have a master there, how much workmanship you would recommend? I asked Murat brother is giving very good price to the original, next week I will buy
|
|
| 08.05.2020 15:13 | # 16 |
| furkan |
|
|
how much output price
|
|
| 08.05.2020 15:13 | # 17 |
| mdincer34 |
|
|
what is the brand of the original, friends, how do we understand that the print pad is original?
|
|
| 08.05.2020 15:13 | # 18 |
| Faruk |
|
|
friends 3 days ago I changed the volant complete and clutch set next to 100 thousand maintenance but like we sank a little  With 890 flywheel complete, 350 clutch set and 100 thousand maintenance, it lasted from 9 am to 5 pm, and kept 275 TL in labor. Okay, we haven't paid the money yet. but the car was like zero. We got rid of the shaking when we were getting up, when the car was going under 70 with a little under 2000 revolutions. Of course I couldn't measure it yet, but in fuel saving, this corresponds to the money we spend and it is enough. For now, only 120 thousand trieres are left. There is no other heavy maintenance, we are inexpensive, so now only oil, water, filter and old pads are left 10 thousand.  |
|
| 08.05.2020 15:13 | # 19 |
| sahin-peugeot |
|
|
[QUOTE = mdincer34] our sponsor falcon peugeot 307 1.4 hdi 2004 model printing pad org. What is the price? If I come to you, do you have a master there, how much workmanship you would recommend? Hello there, I saw your article now it is a little late, it is difficult for me to follow the issues. the current price of the clutch set is 200 TL originally, we help with the workmanship 1.6 110s need to be touched with the flywheel, since 1.4s are fixed flywheel, the clutch set will be sufficient, the flywheel does not easily break, 1.6 diesel flywheel price 500 tl (original) clutch set 250 tl (original) Good luck with
|
|
| 08.05.2020 15:13 | # 20 |
| sahin-peugeot |
|
|
[QUOTE = Faruk] friends 3 days ago I changed the volant complete and clutch set next to 100 thousand maintenance but like we sank a bit With 890 flywheel complete, 350 clutch set and 100 thousand maintenance, it lasted from 9 am to 5 pm, and kept 275 TL in labor. Okay, we haven't paid the money yet. but the car was like zero. We got rid of the shaking when we were getting up, when the car was going under 70 with a little under 2000 revolutions. Of course I couldn't measure it yet, but in fuel saving, this corresponds to the money we spend and it is enough. For now, only 120 thousand trieres are left. There is no other heavy maintenance, we are inexpensive, so now only oil, water, filter and old pads are left 10 thousand. [/ QUOTE] how much they have spread to flywheel |
|