Peugeot Forums - Peugeot Fan Club

307 engine oil leak

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 16:20 # 1
arslanbey01
2006 new chassis peugeot 307 gasoline car had oil leaking, I went to a biker, I opened a subject about it, but there was a new development, so I opened the subject again. I went to the biker with the complaint of oil leaking in my car, they told me that it was leaking from the rear crank seal, at the same time, they said that it might have worn out the clutch lining and we should change. I bought the original of the clutch lining, they took the crankcase's sub-industry, they changed, but one day later, there was oil leakage again, I went again, this time we put the crankcase on the side industry, they said it was leaking again, I went and took the original. however, the next day there was oil leakage again, I went again, they said that the gear oil was leaking from the right axle seal, they took it from the particle, they changed an axle seal, the next day again, the oil leakage this time, they asked for the original of the ex seal, they bought it again & nbsp; oil leak again today. When I went again today, they said that the oil seal and exhaust system will be removed and the cap seal will change inside. I did not hear such a thing. I want to get your opinion. Also, when I first went to workmanship, I did not give any more because they did not relieve my problem and they do not want money. I would be glad if you answer if there is such a thing as this cap felt.
08.05.2020 16:20 # 2
Guests
you do not work, but I hope you are getting the parts yourself, go to the parts they want, buy them from a remote place too & nbsp; I saw the particle + master workbench
08.05.2020 16:20 # 3
arslanbey01
now I decided to get it out of service, if you live the parts from the vineyard, you can not find the peugeot parts easily in the particles. What is this cap felt?
08.05.2020 16:20 # 4
mdincer34
yta valla the guys are not fully beaten, no, this is my patience based on my patience.
08.05.2020 16:20 # 5
Haksen016
If you are very patient, go and go. It is the first time I have heard of the cap felt. Knowing friends will surely come out.
08.05.2020 16:20 # 6
Guests

I am currently writing from Ankara Aşti, friends. At 1 o'clock my car will get up. I am writing from a pastry shop where I live. > The original is the engine top cover seal, as we call it top cover gasket.

& nbsp;
but I think change your master. I saw himself very foolish and trial-misleading.
& nbsp;
08.05.2020 16:20 # 7
nightfly
hi there was an oil dip in my car too it is said to be in the oil filter body. was sweating in the engine block .. from the battery of the vehicle to the brain to replace this part. Many parts up to the catalyst were dismantled and the material cost me 120 TL with workmanship of 40 TL. I don't know if your oil leak is from there but I wanted to have an idea & nbsp;
08.05.2020 16:20 # 8
nightfly
I think it's going on, the oil is still on the right side of the engine blog, today I will clean it and look at it again in a few days
08.05.2020 16:20 # 9
djchaos
man, first come easy, you change the felt of the master, what is this & nbsp; if there is patience, I think the shaking is changing, the shake is changing, the tool has not changed, I would send my master if you were close, I had the oil reduction and water drop 2 3 places (just because they are not really master) 780 tl + workmanship I brought to my master oil cartel gasket thermostat gasket operation okay neither oil loss or water reduction (even the fault was brought to other masters, to see how many masters how memorized they are) easy to come to our sponsor falcon contact peugeot It sells original parts and helps you with everything.
08.05.2020 16:20 # 10
Guests
[QUOTE = djchaos] buddy first come easy you change the felt of the master what is this & nbsp; if there is patience, i think the shaking is changing shaking is changing, the tool has not changed the seal has not remained I would have sent my master instantly I had oil reduction and water reduction 2 went to 3 places (just really if they are not master) cost me 780 TL + workmanship took me to the master oil cartel gasket thermostat gasket operation okay neither oil reduction nor water reduction (even the failure even took it to other masters, to see how much master how memorized they are) falcon contact peugeot both sells original parts and helps you with everything [/ QUOTE]

How much was your water reduction and how much did you get a sump gasket etc? & nbsp;
08.05.2020 16:20 # 11
nightfly
Hi, I have an oil leak last Wednesday my tubing was renewed. gakat yesterday i was failing yesterday there was an oil leak up to 30 cm from the left front wheel. my car is auto, sometimes misses back on slopes. may it be gearbox oil? & nbsp;
08.05.2020 16:20 # 12
dukenukem82
The top covers and cylinder head gaskets wear out quickly in pejoes as if they had to be looked at first. know the service job, do not be surprised by the service.
08.05.2020 16:20 # 13
elsoberano
trial and error is unfortunately the most common method used by our masters in finding solutions. of course, this is happening to us users. my father has a mercedes e200 due to the faulty lpg assembly, we have changed the idle imbalance and stopping problem due to many reasons, we changed 1000 tl parts, even those who took the job to the change of brain and throttle, but without correcting them, we corrected the lpg assembly by directing a proper master. until this time we spent 1000 TL in vain. & nbsp; In our country, there are people who do not understand the tradesmen who are skilled in the country.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”