Peugeot Forums - Peugeot Fan Club

307 engine blown?

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 14:55 # 1
DeatH1907
I bought a new 307 1.4 hdi xt 2004 model car, but when I took it to the master, there was blowing in the engine, as far as I researched from the forums, I was confused if there was anybody knowing about this and if it could help, I would be very happy ...
08.05.2020 14:55 # 2
DeatH1907
no friends to help?
08.05.2020 14:55 # 3
Guests
my brother looks like the condition of the engine is not good if there is blowing in the engine
08.05.2020 14:55 # 4
Onur
let yaw not blow these earbuds, there is no engine, while the engine is running, open the oil cap, every engine blows compression test your car depending on compression measure engine power dyno fln then understandable full engine condition
08.05.2020 14:55 # 5
Guests
All I know is that if there is blowing in the engine, there is a serious problem in the engine, I share it in person because the same thing happened to me .... then you can see if the engine blowing is hearing through the ears.
08.05.2020 14:55 # 6
Onur
[QUOTE = albaydemircan] All I know is that if there is blowing in the engine, there is a serious problem in the engine, I share it personally .... then you can see if the engine blow is hearing from the ear [/ QUOTE] Sırıtma When you open the oil cap, there will be a slight blowing, so why is it normal in the compression test?
08.05.2020 14:55 # 7
Guests
okay then it's okay ... it will occur over time i said i will say
08.05.2020 14:55 # 8
Onur
We don't get the motor down for the first time until it goes, when the time comes, don't worry, we've swallowed more or less industrial dust Göz Kırpma
08.05.2020 14:55 # 9
DeatH1907
There is no problem in my car's traction, only when it goes up to 4-5 thousand cycles, black smoke is still going to be taken to the service tomorrow.
08.05.2020 14:55 # 10
Guests
you are right, the most expensive powder is industry dust after all 6 billion expensive industry dust Thumbs Up the human son swallowed it once, it will not even pass through the industrial neighborhood ... you know it very well, but the purpose is to answer the subject ... let's write something ... there is only one thing to say that the engine must be checked as soon as possible the albaydemirc 2010-10-21 23:47:19
08.05.2020 14:55 # 11
Onur
[QUOTE = albaydemircan] you're right, after all, the most expensive powder is industrial dust, as expensive as 6 billion industrial dust Thumbs Up [/ QUOTE] demi, but when the master is from us, he will go down to 1-2 I don't need to worry if I smash the car
08.05.2020 14:55 # 12
Onur
[QUOTE = DeatH1907] there is no problem with my car's traction, only when it goes up to 4-5 thousand revolutions, black smoke is thrown anyway and I will take it to the service tomorrow.
08.05.2020 14:55 # 13
DeatH1907
Thank you very much, I will take it tomorrow, let's look at the service.
08.05.2020 14:55 # 14
Guests
[QUOTE = Honor] [QUOTE = DeatH1907] There is no problem with my car's traction, but when it goes up to 4-5 thousand cycles, black smoke is going to be taken to the service tomorrow. Regards on vehicle [/ QUOTE]
When the master is from you, it does not pass to you, but when someone else is, he starts to swear by his children to lie on his head. After that, why does our stomach rejoice? It buried me 2 of your masters. He buried his two children .. God sees everything.
08.05.2020 14:55 # 15
Guests
[QUOTE = Honor] [QUOTE = albaydemircan] you're right, the most expensive powder is industry dust after all, it is as expensive as 6 billion industry dust Thumbs Up [/ QUOTE] demi, but when the master is from us, it will be 1-2, I don't need to worry if I smash the car [/ QUOTE]
Well, why should I worry about you? Why do you become a bride and groom? The man has opened the subject. I tried to help you. The man has opened the issue since the morning. Why did not you comment before?
the albaydemirc 2010-10-21 23:53:07
08.05.2020 14:55 # 16
Guests
When the circlips around the pistons are worn, the engine cannot provide sufficient COMPRESSION (PRESSURE) at the time of EXPLOSION because more acceptable DECOMPRESSION (LOSS OF PRESSURE) occurs between cylinders and circlips (as the masters say: "BLOWING"), the engine decreases more oil and has to be rectified. Dolmus and taxi drivers know these situations very well.
08.05.2020 14:55 # 17
Guests
If your vehicle is gasoline: remove one of the spark plugs, remove the dipstick, press high pressure air (with compressor) through the hole of the spark plug you removed. if oil sprays from the place where the dipstick is installed, the engine rings are blowing out.
08.05.2020 14:55 # 18
Guests
We took the car to the past friend, we took it to the industry.
08.05.2020 14:55 # 19
dbmaster
exactly as it says right behind every car if the engine is hot whichever car you open the oil cover, you have a painful blow, my car is not problem in the engine at 160.000 but the vehicle cannot break the 307 gasoline of HDI 110 hp
08.05.2020 14:55 # 20
C!N
I know that if the engine is blowing, it needs a break. Before I bought my current 206, I decided to buy the 2003 model, which is more than 52 thousand km, which I intend to buy, because there is such a problem in the engine of the Audi A3 1.6 vehicle.
Page : / 2
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”