307 door columns whirling :)

My 307 vehicle has a mid kit on the doors, but unwanted sounds are produced because there is no insulation on the doors & nbsp; if we have mdf on the back panzo, if we mount the mid team there, it will sound better or worse

If you have mdf behind it, of course it will sound good. If you want insulation, you can do it yourself

I think it would be better if you insulate. If you remove the black sponge at the back and install the MDF, it will be heavy, the ropes may not be able to lift the MDF when you open the tailgate. It is useful to keep it original.

I do not have any knowledge about how to do or make the insulation ..

Since mdf is not expensive, I prefer. I think the insulation is getting expensive, I wonder what is the cheapest way of insulation?

[QUOTE = trbilo] mdf is not expensive because I prefer it. I think the insulation is getting expensive, I wonder what is the cheapest way of insulation? [/ QUOTE] & nbsp;

MDF is at least 50-60 TL. If they are familiar, they make 40. bitumen cloths are sold for insulation. It is adhered to the door with the help of a heater, like a smooth. but I don't know the cost and details.

The issue of insulation has been discussed before, even with pictures. but I still can't find the topic active.

I called and scanned. I found the subject for you. Our member named zazu has prepared:

http: // www.peugeotturkey.com/nasil_yapilir.asp?MakaleID=13 h_307 2010-01-14 21:57:33

[QUOTE = h_307] I searched and scanned. I found the subject for you. Our member named zazu has prepared:

http: // www. peugeotturkey.com/nasil_yapilir.asp?makaleıd=13 [/ QUOTE] & nbsp; Thank you for your interest, then would it be easy to disassemble at any door failure?

you will see the clips while you are already removing the door plastic. be careful not to break it. If it breaks, you will get a new one.

Correct it if I got it wrong. Midler is currently tied to the doors and door pandezots are making a disgusting buzz due to vibration.

[QUOTE = hasimayaz] If I got it wrong, fix it. Midler is currently connected to the doors, and door pandezots are making a disgusting buzz due to vibration ..

[/ QUOTE]
< br /> I understood just like you, Haşim abi..and in time I pasted the link of the subject you added. h_307 2010-01-14 22:19:36

thank you very much come on. this descriptive information will work very hard, but your job is very difficult. my hand is prone to these jobs but you have very nice workmanship. You can overcome this just as you tied ten numbers in my system.

[QUOTE = hasimayaz] If I got it wrong, fix it. Midler is currently connected to the doors, and door pandezots are making a disgusting buzz due to vibration .. [/ QUOTE] yes. & Nbsp; The bidet does not work properly because the columns are connected to the door trim and the door on the back of the column cannot find the necessary space since the door is closed. I do not know that it is forbidden to give a link, but the transaction here is number 10 & nbsp; & nbsp; http://www.forum307.com/installation-caisson-peugeot307.php cut the sheet behind the columns. in this case it will surpass me to make the best mdf done :)
trbilo 2010-01-14 22:30:28

[QUOTE = selcuk-307] thank you very much come on. this descriptive information will work very hard, but your job is very difficult. my hand is prone to these jobs but you have very nice workmanship. but you can overcome it just like you tied ten numbers to my system. [/ QUOTE]

vaaayy lion gargle. If there is anything we can do, we have nothing to spare from you. We take it together. ..Keep in mind; goods number 10!

friends who helps in the process of this link? & nbsp; I do not have a mid team, but my 307's doors are glancing.

this is the link I say

& nbsp;

http://www.peugeotturkey.com/nasil_yapilir.asp?MakaleID=13 < / a>

Give a plumber 50 lira, do not reach yourself or something ..

No, of course. I don't. I'm asking who's going to be & nbsp; and I am ... & nbsp; & nbsp;

friends, to whom can I get this isolation job? & nbsp; I am waiting for your answers. sagolun & nbsp;