|
|
|
|
307 does not eat gas |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 20:57 | # 1 |
 Sercan ozeltin |
|
|
It doesn't go up, no matter how much I press the gas After a while it gets better but the traction drops a lot Friends who have the idea that each master says something different I would be glad if it helps .. |
|
| 08.05.2020 20:57 | # 2 |
 Selcuk55 |
|
|
high probability of flow meter
|
|
| 08.05.2020 20:57 | # 3 |
| Sercan ozeltin |
|
|
pp 2000 does not fail, if flow meter does not show there |
|
| 08.05.2020 20:57 | # 4 |
| Selcuk55 |
|
|
it may not always show, at least I know from my own 206 vehicles.
|
|
| 08.05.2020 20:57 | # 5 |
| Sercan ozeltin |
|
|
Well, do you have problems when it doesn't fail because mine is the same for every starter
|
|
| 08.05.2020 20:57 | # 6 |
| Selcuk55 |
|
|
When I first did it, I went that way for 20 km and then the lamp turned on but there is nothing at the moment, but I discovered that the lights give a flowmeter error more often when the starter pressure is not running and it does not run the air in the air conditioner.
|
|
| 08.05.2020 20:57 | # 7 |
| Sercan ozeltin |
|
|
connected to the device many times I did not receive a flow meter failure but thank you suggestion
|
|
| 08.05.2020 20:57 | # 8 |
 sonerkyl |
|
|
First of all, welcome to us. a similar problem was experienced by a friend in the 206 1.4 hdi vehicle. The problem has been found to be caused by the engine ecu, subject to the person who bought it after selling it. I think it is necessary to find a good auto electronics engineer and have it checked. cables to both the fuse box and the engine ecu sockets. In fact, if your teacher is prone to you, you can buy oil-free contact spray sockets etc. clean it and put it back in.
|
|
| 08.05.2020 20:57 | # 9 |
| Sercan ozeltin |
|
|
Thank you, they are the only ones left. I will go to the electrician today. Let's see. |
|