307 Digital air conditioner lighting problem and solution |
|
• Homepage » PEUGEOT MODIFIED PLATFORM » 307 |
08.05.2020 15:38 | # 1 |
gozem | |
teşkkrler |
08.05.2020 15:38 | # 2 |
metin | |
Hello my eyes. First of all, let me ask you what did you do with the bow business. there must be bulbs on the back of the digital air conditioner. I know that you have the possibility to replace the light bulb by removing the air conditioner afterwards, it has not happened to me but I have read a few articles like this. here is information on how to disassemble.
|
08.05.2020 15:38 | # 3 |
gozem | |
Tşkler .. I bought the original spring for the vehicle and brought it back. In this way alone, it does not enjoy driving and visually. I have an examination at 7th, and I will endure until then. I am thinking of having a 3cm spring for later. By the way, I was shocked when my car was just 7 cm printed :) Now like a foal: D |
08.05.2020 15:38 | # 4 |
golge_oyunu | |
I have the same problem, too, the key lights of the digital air conditioner do not light up, but the indicator is working .. my text mate o linte manul air conditioner dismantling, do you have a digital room or are both disassembling the same way?
|
08.05.2020 15:38 | # 5 |
gozem | |
The problem is solved, only after opening the ashtray there are 2 screws, you can remove them and remove the outer caster. No need to disassemble the remaining frame 2 above. then you will see 2 more screws holding the digital rug panel, remove them after removing them. you will replace the bulb that is breaking out. |
08.05.2020 15:38 | # 6 |
golge_oyunu | |
thank you so much my friend i will try the first job tomorrow :))
|
08.05.2020 15:38 | # 7 |
golge_oyunu | |
|
08.05.2020 15:38 | # 8 |
golge_oyunu | |
my car is automatic, I removed the two screws from the ashtray but it seems impossible to remove the panel ((
|
08.05.2020 15:38 | # 9 |
gozem | |
First, try to remove the frame around the gear by blending it, (I don't think it has a screw), and then the frame outside the air conditioner with a flat screwdriver, it is not too hard to work.
|
08.05.2020 15:38 | # 10 |
golge_oyunu | |
It took)) It took me a while to think about how the frame around the gear would come out. Then I messed with my nails, it came out a little easily, I took care of it as you say backwards. Thank you very much .. :)
|
08.05.2020 15:38 | # 11 |
maestro | |
friends my air conditioner is manual. The lights of the buttons are on, but the panel lighting is not on, also the light of the ashtray was not lit today. |
08.05.2020 15:38 | # 12 |
maestro | |
+
|
08.05.2020 15:38 | # 13 |
Canip | |
I have the same problem. let me change, thanks for the info (thanks to pejo we will be an auto mechanic)
|
08.05.2020 15:38 | # 14 |
albayman | |
I'm thinking of getting on the weekend lighting lights if I can find time :) Although it is not this weekend, I am thinking of making the colors of those lights blue or white. If I do, I will share the photos with their descriptions. |
08.05.2020 15:38 | # 15 |
seydisehirli | |
hello, the lighting of the keys does not work in me, I will try the buruau writers at the end of the shift, but is there a light bulb in the small red place on the left side of the ashtray? can you help?
|
08.05.2020 15:38 | # 16 |
EmSul | |
I said I won't open a new subject, digital air conditioner key lights are not lit, I can reach the light bulbs of the air conditioner panel by removing the tape without disconnecting the panel, but I tried to turn it.
|
08.05.2020 15:38 | # 17 |
Orcun.Dmr | |
[QUOTE = EmSul] Friends I said not to open a new topic, the digital air conditioner key lights are not lit, I can reach the bulbs of the air conditioner panel by removing the tape without disconnecting the panel, but I tried to turn it, I could not turn it. Will I pull it out or force it by turning it [/ QUOTE] It turns out, but I say that you do not reach the empty spaces, it will be easier to remove 6 screws and remove the complete panel.
|
08.05.2020 15:38 | # 18 |
EmSul | |
I do not want to remove the plastic parts very much then they make sounds or something annoyed
|
08.05.2020 15:38 | # 19 |
Orcun.Dmr | |
No, there is no problem, I have removed all parts of the chest except 307, and the trim sound is zero despite that.
|