307 CLUTCH PROBLEM

Friends 307 1.6 hdi 90 hp in my car, clutch clutch is very high and there is a very difficult transition in gear shifts.

I use the same vehicle, I don't have a problem with gear shifts, but it also grips a little above. The pressure of the vehicle raises more prominent problems near the end of the pad. If the vehicle has difficulty especially on the hill starts, it is useful to have them checked by evaluating them.

There is some difficulty in the hill starts. About a month ago, on the Istanbul-Kastamonu return road, I did not switch to 3rd gear, I came from 2 to 4. When I put it in gear, it was wasted on its own. But after coming to Istanbul, that event resolved. but his grasp up so far made me suspect.

Another problem is that the gear shifts too hard or shifts out of gear. I don't think it's a pressure-related situation, when the pressure gets weaker enough, the gears are completed with a friction feel, but I don't think your problem is different, it's about the oil. it is good to have a good master look.

slm.

the feeling of hanging is related to the rope, of course, if there is a rope in 307

Of course, it depends on usage but how many km of your vehicle?

Hello, I'm Omer from Edirne center. I think the clutch clutch in my 2003 model 155bin 307 1.4 hdi car is also very high. Also, reverse gear is often difficult, first I put it on 1 then back ... I asked the master, because the gear is gripping up, no problem, brother said fine. and it trembles on the first departure. the front pads and discs are good, only the back pads are finished, I will replace them this week.

flickering at the top, these shows that the press lining is near the end

Thank you for the information, I think I need to go to a better master.