|
|
|
|
307 Charger |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 14:54 | # 1 |
 12omantic |
|
|
friends went to gas adjustment the other day, when I tried to start the car, it did not work, it does not turn off, it says it is okay. I can not say something without looking etc. And he told me that he would be at least 150 TL down. I went to another peugeot service and he did the same thing. He worked as if there was no problem when I started the car the next day. |
|
| 08.05.2020 14:54 | # 2 |
 mettow |
|
|
Greetings, I understand that your vehicle is LPG. Although it was not branded as Peugeot, my father-in-law had the same problem with my car. In fact, I was driving the vehicle, while it was moving on the road, it went blunt. Even if I switch it to gasoline, it didn't work. I struggled for 15 minutes and had bought and worked by chance. Then it happened whether he worked one day as he did to you or not. His vehicle was also from LPG. Later, it was understood that the problem was in the electrical component that provided the connection with LPG and that it was caused by the lack of contact with the cables. I think you have a check.
|
|
| 08.05.2020 14:54 | # 3 |
 Guests |
|
|
same problem last month i was 206 or your dynamo 2 advice to you 1. I use the vehicle for more than 2 years. Buy DIOSAN Valeo brand dynamo zero zero price is around 300 TL. 2. I had it repaired, the coals changed, the starter and the bales changed, the workmanship, the parts cost me 160 TL, for 1 month, no problem, maşşalh, but if you say, I will make it in the service, I called the chassis number and gave me the price of 1249 TL with workmanship. it was very difficult to find the parts one by one here, if it was repaired before, I am in custody for me. the only important thing is that you have to find a very good master, you have to find an electrician who has removed the wheel to remove the disassembly, very troublesome to remove it Good luck with
|
|
| 08.05.2020 14:54 | # 4 |
| 12omantic |
|
|
friends, I will go to the industry tomorrow, the service is very demanding, I will have it repaired, I have no other remedy. ..
|
|
| 08.05.2020 14:54 | # 5 |
 impala |
|
|
I had the same problem. problem starter automatic. You can solve the problem by giving 75+ labor. The margin automatics are part of the margin engine. they may not change in service. It is a problem that a non-peugot master cannot understand. (Istanbul) The masters of Hazarbey Oto in Kadosan solved the problem immediately.
|
|
| 08.05.2020 14:54 | # 6 |
| 12omantic |
|
|
Pejo masters in the industry do not get any different from the service. I only realized that the material only comes cheap, so much bidet today. When it is over 90, it clicks and releases tomorrow. A good auto screen. Hopefully it will be solved without much trouble.
|
|
| 08.05.2020 14:54 | # 7 |
 atilla1280 |
|
|
problem charge dynamo, I had it a month ago, topkapı auto industry.dinamo has been repaired 75 TL. |
|
| 08.05.2020 14:54 | # 8 |
| 12omantic |
|
|
I wonder if there is a place you know in izmir, the construction of a reasonable price will be the same as mine ...
|
|
| 08.05.2020 14:54 | # 9 |
| atilla1280 |
|
|
Unfortunately, there is no izmir. But there is an absolute familiar friend in the forum.
|
|
| 08.05.2020 14:54 | # 10 |
| 12omantic |
|
|
build brother
|
|
| 08.05.2020 14:54 | # 11 |
| 12omantic |
|
|
Today, Çiğli organized and changed the starter automatics to friends who wrote cvp tsk ....
|
|
| 08.05.2020 14:54 | # 12 |
 oguzcan |
|
|
Friends, do you have a good master in Ankara? I have the same problem.When I stopped, I did not try a master, I called the master.I put the electric cables in a dinoma there. and I ask for a price |
|
| 08.05.2020 14:54 | # 13 |
 eneslan |
|
|
The same thing happened to me, but the problem with me was about the weakness of the coals in the starter dynamo. No problem left after changing
|
|
| 08.05.2020 14:54 | # 14 |
| oguzcan |
|
|
[QUOTE = eneslan] The same thing happened to me, but the problem with me was about the weakness of the coals in the starter dynamo. No problem left after changing [/ QUOTE] how many have you changed?
|
|
| 08.05.2020 14:54 | # 15 |
| eneslan |
|
|
[QUOTE = oguzcan] [QUOTE = eneslan] The same thing happened to me, but the problem with me was about the weakness of the coals in the starter dynamo. No problem left after changing [/ QUOTE] how many have you changed [/ QUOTE] I can't remember the price, it was a long time but I can contact the service and find out how much it costs.
|
|