|
|
|
|
307 CALORIFER AND AIR CONDITIONING PROBLEM |
| • Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 | |
| 08.05.2020 15:02 | # 1 |
 tanilbakicimsit |
|
|
|
|
| 08.05.2020 15:02 | # 2 |
 Guests |
|
|
It can be either from the rheostat or on the edge of the fan that adjusts the fan speed. If you have an electrical device, you can reach where the fan is and start the control from there.
|
|
| 08.05.2020 15:02 | # 3 |
 koliva |
|
|
[QUOTE = tanilbakicimsit] FRIENDS IN MY VEHICLE WITH 4 CALISIO TO CALISMIO ONLY TO 3 STAGES OF CALISMIO ONLY, I HAVE A PROBLEM WITH THE CALISIO 4 / TALEMI WITH A PROBLEM [I HAVE A PROBLEM]. The problem is most likely caused by the heater fan resistance. You can fix it yourself if you are a bit susceptible to this. Sometimes the existing resistor breaks off. All you have to do is solder instead. You have to look strange.
|
|
| 08.05.2020 15:02 | # 4 |
| koliva |
|
|
If I have to explain more how to do it, (Translated from an English site :) This resistor is located under the screen in the middle, at the top of the heater section. The only way to achieve this is to insert the torpedo. After inserting the glove box, you insert the heater fan. Then you reach the heater section and therefore the resistance. Then you turn the resistance a quarter turn and pull it downwards, and after removing the connections, you remove the resistor. If it is broken, you will already see it, if not, you can test it thoroughly with a gauge. (Meanwhile, the resistance depends on the ground of the heater circuit). |
|
| 08.05.2020 15:02 | # 5 |
| tanilbakicimsit |
|
|
TESEKKURS I WILL TRY TO TRY SAGOL FRIENDS
|
|
| 08.05.2020 15:02 | # 6 |
 mixcool |
|
|
Brother, I had the same problem today, could you solve it?
|
|
| 08.05.2020 15:02 | # 7 |
 yavuz25 |
|
|
First of all, welcome to our form.
|
|