![]() ![]() |
|
![]() |
307 brc? atiker? |
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307 |
08.05.2020 15:05 | # 1 |
![]() |
|
|
08.05.2020 15:05 | # 2 |
![]() |
|
You should always find a good master as I have always said ... Assuming that the master is of the same quality, I can say that the "real brc" is more qualified even though I am not a waste worker. but in brc, false scarves are circulating in the market. They sell a scarce under the name smart, I don't understand. The brc service that I went to get an idea from before set up just like me. "" "Brc will not be in your vehicle. We are wearing smartphones for peugeot and citroens. We are still on the same as brc. If brc does not cost us, we will continue to sell the smt. brc 1600 smart is 1250 lira" "" because I heard this sentence and brc de I do not have detailed information because there are so many different software, and because of these, I do not stand on the brc, and I cannot recommend it directly because of what I wrote. There is not a little bit of suphem about waste. Everything is very clear in the waste. a scarce in money. but I can say that the piece is inferior in quality. Very easy to adjust the heat. there is no problem like compliance. If it is not embarrassing, it happens to every car :)) If you find a qualified master, I would say no hesitation ... I am very pleased in my car ... but I'm a scarce one between the two. If you find the master of the inheritance, I will say that you have lovato ... like the price of 1200 TL. less expensive than waste, brc. The regulator is very nice. I think you will be satisfied ... You can also think of zavoli again, around 1400 TL. It can be very nice assembly with pan evo injectors that can be mounted individually. software is very nice ... but again I am saying what you should not forget. You have to find a qualified master before the brand. In his memory, every scarce fits your engine. Because it doesn't matter if you work with full sequential spraying of the engine ... if the problem arises, it is related to adjustment or assembly. I do not expect the systems to have a shortage of compatibility. the most troubles can occur in half-row and full-group sprayers ...
|
08.05.2020 15:05 | # 3 |
![]() |
|
I have 2 gasoline c3s, I have an atiker and the other has brc. I appreciated both in the same service. Atiker was constantly breaking something, I can't remember its name, I think it was like a butterfly. But it has been 2 years since I had brc, and there was no problem. There was a problem in the room, there was no other problem, they were already changing the warranty from the warranty.
|
08.05.2020 15:05 | # 4 |
![]() |
|
[QUOTE = klemann] I have 2 gasoline c3, I have an atiker and the other has brc. I appreciated both in the same service. Atiker was constantly breaking something, I can't remember its name, I think it was like a butterfly. But it has been 2 years since I had brc, and there was no problem. There was a problem in the room, there was no other problem, they were already changing the warranty from the warranty. [/ QUOTE] I would be interested when the problem was related to waste. What do you say "If something like butterfly"? I don't understand what you mean if there is nothing like a butterfly on the system. multıfast is scarce and can be a bosch brand pressure sensor with black color on the lpg filter? I'm putting your picture down below. When I say butterfly like this, I only think of it :)) ![]() I have been riding for 1.5 years and 22.000 km so much. |
08.05.2020 15:05 | # 5 |
![]() |
|
teacher, it was very difficult to get a lpg, it was never on the face of that tool or not, I can't remember the name right now
|
08.05.2020 15:05 | # 6 |
![]() |
|
If the pressure sensor is malfunctioning, as I am saying, it may be troublesome because there is no proper pressure ...
|
08.05.2020 15:05 | # 7 |
![]() |
|
Do not get stuck in the brand, find a good master, you will find it in 307 where the waste does not fit. I got 206 ma brc, I use 30.000 km, I am very satisfied. For the first 1 month, the setting was disturbed so much that the room was broken.
|
08.05.2020 15:05 | # 8 |
![]() |
|
I have lovato for 1.5 years, like a monster in 307 im
|
08.05.2020 15:05 | # 9 |
![]() |
|
I mean atiker taktılı 2 months .. the same vehicle like the same gasoline as I mean, there is no event of falling from the traction.
|
08.05.2020 15:05 | # 10 |
![]() |
|
walla brother, find a good master first. I am using bn brc 206 1.6 xs car just like gasoline like calisio no performance loss but master very important |
08.05.2020 15:05 | # 11 |
![]() |
|
Master Master Master . . . I use BRC too, but it brought it out of my nose until it got the setting. You listen to CECOLI master. He wrote what needs to be written.
|
08.05.2020 15:05 | # 12 |
![]() |
|
Greetings, respect, love, greetings ... ![]() |
08.05.2020 15:05 | # 13 |
![]() |
|
Thank you for your comments, friends
|
08.05.2020 15:05 | # 14 |
![]() |
|
I think the place that installs a lot from the brand is important .. I use Atiker on 1.6 16v 110hp engine, I have never had a problem so far ..
|
08.05.2020 15:05 | # 15 |
![]() |
|
I personally recommend Brc ... I have a friend who used the 2005 206 x-line tool, he is very satisfied right now ... |
08.05.2020 15:05 | # 16 |
![]() |
|
[QUOTE = se®k @ n] I think the place that installs more than the brand is important .. I use Atiker on 1.6 16v 110hp engine, I have never had a problem so far .. [/ QUOTE] mrb brother, where do you appreciate it |
08.05.2020 15:05 | # 17 |
![]() |
|
cem bro you made it very descriptive again.
|
08.05.2020 15:05 | # 18 |
![]() |
|
I want to have my vehicle lpg fitted but I couldn't decide. the low performance and sound that got me most indecisive. I've been in a friend's car before. There was an incredible sound. I don't know maybe the injectors have moved to hide. I am very curious about how the performance will look.
|
08.05.2020 15:05 | # 19 |
![]() |
|
[QUOTE = text] cem bro you made it very descriptive again. [/ QUOTE] bro, regards, greetings, we didn't see you in any kind :))
|
08.05.2020 15:05 | # 20 |
![]() |
|
go to the place where sercinho brother serkan got appreciated. your engines are the same anyway. If you think about waste, you can have it installed in the same place ...
|