Peugeot Forums - Peugeot Fan Club

307 brakes go all the way down

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 20:59 # 1
Gbulbulyay
Friends looked at the pads. They said no problem, they said the rear brake center would change and they charged 700 TL. My brakes hold but go all the way down to the full stop and the pedal is soft. I would be glad if you could help. Good evening.

08.05.2020 20:59 # 2
Selcuk55
Brothers either have air in their brakes or the westinghouse is faulty, but the only material to make 700 lira here is the westinghouse. If you want 700 for the rear brake center, try to make it better than the master and ask you as a cost.

If there is air in the brake, 50 lira hydraulic is included.
If Westinghouse is out of order, except 600-700 labor
The rear brake center is 2 pieces, they do not break down easily, and it does not pass as the center, it passes as a brake caliper and if it hits with a hammer, it will not break down.
08.05.2020 20:59 # 3
Gbulbulyay
Hodja, I had the maslak paris oto checked. If he's trying to whip it up there. Is there a place to recommend?
How should I proceed and solve the problem? I would be happy if you help.
08.05.2020 20:59 # 4
Gbulbulyay
Could there be a problem in the brake master center?
08.05.2020 20:59 # 5
Selcuk55
I am from Samsun, my brother can either be the brake main center, of course, the main center will take a breather or kidnapping from the places installed on the westinghouse.
08.05.2020 20:59 # 6
ben_erhan
Well friends, I have a polo car and the brake center is broken. it had the same fault .. the brake hit the bottom. Of course, oil was dripping on the bottom of the rear wheel .. Its price was 40 TL. Last week, the same problem was in the opel of the beech track 800tl. I say good research.
08.05.2020 20:59 # 7
eberkol
Check each wheel to see if there is a problem with the malfunction in the brake center or on one of the wheels. If there is no oil leakage in any of them, then it means that there is a malfunction in the center, it comes to those money with repairs and parts replacement, and now you are driving your car seriously dangerously at all times, the brake may not hold completely at all times because you are throwing some more oil out to the bottom, when the oil runs out the brake does not hold at all. The same situation happened to me in my old vehicle Clio, I was having an accident.
08.05.2020 20:59 # 8
Gbulbulyay
Thanks for the answers. It works to check the leak, if I pump the brake while it stops, the leak would be? If there is air in the brake, I do not want to spend for nothing. I never looked at the oil level. My brakes hold, but there is a gap in the brake oddly.

08.05.2020 20:59 # 9
eberkol
must be while the vehicle is running because the hydraulic pump does not work. Also, I think leaks have already leaked, I think you check the tires there are oil stains. See Janta or something, if it is lean, it will definitely be obvious.
08.05.2020 20:59 # 10
Gbulbulyay
There is no leak at all. Also, the brake did not go down to the fibe today. I looked at the hydraulic fluid, there is no decrease. I am very confused.
08.05.2020 20:59 # 11
x571
[QUOTE = Gbulbulyay] Thanks for the answers. It works to check the leak, if I pump the brake while it stops, the leak would be? If there is air in the brake, I do not want to spend for nothing. I never looked at the oil level. My brakes hold, but there is a gap in the brake oddly.

[/ QUOTE]

Yes, it is checked while it is running. Put the oil to its maximum place 6 7 times if there is a leak in the brake, the first one is obvious, the level decreases. If it does not fall, there is also a problem in westing. It's not like air work. Best of all, while taking the brake hose, replace the brake centers.
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”