Peugeot Forums - Peugeot Fan Club

307 belt sounds (with video) Resolved (powder power)

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 16:18 # 1
Guests
friends who have been complaining for days, there are different comments to the sound of the belt, there are people who say that there can be a belt from the masters. I'm sure they can't say anything, they won't send me all the tracks unchanged, ,,
[TUBE] ke60Bs8yrbE [/ TUBE]
htasay 2011-11-03 11:18: 17
08.05.2020 16:18 # 2
I Love My Pug
My brother is past, I can't comment on the voice, unfortunately there is no sound on the computer.
08.05.2020 16:18 # 3
Guests
There is a similar sound in my car when starting the morning or when the engine is cold. When it gets hot, it shuts down. I'm not exactly sure, but they said it could be from the hoop. For about 6-7 months, the voice in me is not on the way for now. Continue. & Nbsp;
08.05.2020 16:18 # 4
Guests
Yes, my teacher was the first wiser thing in the morning, the smartest comment came from the master who called me the hoop, but now I am undecided about what to do. I have bought the car, it has been 1.5 months, we have this voice for 1.5 months. Since we couldn't buy it from the man in the first morning, we ate this voice as well :) I don't know what I did, I was undecided.
08.05.2020 16:18 # 5
Guests

[QUOTE = htasay] yes, my teacher is the first one in the mornings, the smartest comment came from the master who called me the pulley, but now I am undecided about what to do. I have bought the car, it has been 1.5 months, we have this voice for 1.5 months. Since we couldn't buy it from the man in the first morning, we ate this voice as well :) I don't know what I did, I was undecided. [/ QUOTE]

Well, you shouldn't believe anyone who said it changed. I think you should be sure. When I took it last year, I said that you will change the timing set without removing my first job from the gallery or you will prove to me how many kilometers ago it has been proved with documents. He was replaced. I saw it with my eyes, it's comfortable. Once, R19 happened to me. May God give up to my enemy, it will break somewhere. It makes a humiliating person. & Nbsp;

If there is no problem, don't touch the masters until we find a master who knows how to handle it. They change all in order, as you said above. & Nbsp;

08.05.2020 16:18 # 6
Guests
the same happened with me. When changing the timing set, the master thoroughly checked, then I bought the grank pulley original for 100 liras. at least 100 pieces of workmanship + workmanship at least.
08.05.2020 16:18 # 7
Guests
the crankshaft pulley has built.
08.05.2020 16:18 # 8
Guests
[QUOTE = 06ilhan06] the same happened with me. When changing the timing set, the master thoroughly checked, then I bought the grank pulley for 100 lira. I think your expense will be 100 pieces + workmanship at least.
[/ QUOTE]
I think it is my hoop, you, the authorized service There is also a shortage of masters in Diyarbakır or in industry. There is no one who has become a pug master, so I am afraid ... Frankly, thanks for the help.
08.05.2020 16:18 # 9
Guests
I took it to my master ford service, I know I made it there, because the 1.6 HDI engine is a global engine, they found the parts C4 307 C-MAX MAZDA all the same, so they found it easily easily. Of course, this would be a temporary solution.
08.05.2020 16:18 # 10
Guests
the track is not a problem, thanks murat sends it on a phone from Istanbul but here is a master to wear it: =)
08.05.2020 16:18 # 11
Guests
Well, my master changed it very easily. It has a wedge that is very easy to remove, but when changing it, it is necessary to remove the timing belt, so it is a bit troublesome.
08.05.2020 16:18 # 12
berk2309
When I insert or install the crank pulley, I know it should not have anything to do with v apricot change triger. I changed it. If the pulley is in trouble, you will get the pulleys of our cars with different automatic gearbox pulleys & nbsp; The motor balance balancing & nbsp; does the problem
08.05.2020 16:18 # 13
berk2309
Bidder may be doing something more distorted in your tensioner bearing & nbsp;
08.05.2020 16:18 # 14
Guests
what happens if i say this job to the point where it went?
08.05.2020 16:18 # 15
berk2309
I happened to me personally, I am studying in Cyprus, I live in Ankara, I go to Mersin with my car and cross the ferry from last year & nbsp; I said the charge lamp was lit right at the entrance to tarsus. I went to the gas station, I stopped, I did not work, I did not run the battery, I looked at the pulley, the empty discharged bos donuyo donu do not have a automatic donor, it was not the chance to vote, the day of the voting, if you stay on the road from the island of Peugeot, we will stay on the road, if you stay on the road, we will stay on the road. I would recommend you to have a look but if it is a tensioner bearing or wrong belt problem, I don't think it will be a big problem, but it has a pulley motor part & nbsp; control is useful because & nbsp; pulley rubber & nbsp; to prevent my vibration, pruning & nbsp; erýo ici bosalýo pulley bosa donuyo :) constant with experience: D & nbsp;
08.05.2020 16:18 # 16
berk2309
bride as far as i see & nbsp; there is no crankcase protection cover, i would recommend you to buy it in your car, very big deal. :) when my pulley is emptied & nbsp; crankcase has fallen into the housing & nbsp; He said if he had fallen down on this path and would have done great damage:) & nbsp;
08.05.2020 16:18 # 17
Guests
Yes, you are right, my teacher, Karter made it important too.
08.05.2020 16:18 # 18
fexzi
I do not feel frustrated, he solved the same type of trouble with citroen with baby powder and I was shocked, I pulverized it lightly and it was good to try it, it was good to try it. "border =" 0 "alt =" Laugh "title =" Laugh "/>
08.05.2020 16:18 # 19
Guests
[QUOTE = fexzi] I do not get upset, he solved the same type of trouble with citroen, with the baby powder of friends, and I was shocked, pulverized, and it was good to try it, it is good to try it. smileys / smiley1.gif "border =" 0 "alt =" Laughs "title =" Laughs "/> [/ QUOTE]
how do I spread my baby powder :)
08.05.2020 16:18 # 20
fexzi
As I said, it was a joke, but the solution was funny even though it sounded funny, as I said, poured it in the fold part of the pulleys and cut the sound & nbsp; "Laugh"
Page : / 3
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”