307 automatic vtes knob

friends 307s automatic gear knobs how to disassemble ?? anyone know ??

I bought 206 imma 307 gear knob. There is a piece in it, the knob is tightly attached to the knob and the knob is attached to it. When I bought it, I removed the knob by turning it to and fro but that white piece remained on the gear lever. Try it with power is not something to break anyway.

The auto can be different only, is "arifkemal" the manual gear you're talking about?

[QUOTE = HakanGokdemir] It may be different only auto, is "arifkemal" the manual gear you mentioned? [/ QUOTE] No, I am talking about the auto in my car, the 206 in the car, the torn knob, I went, I found the dismantler 307, I disassembled it on the gear, so there is no mechanism. Metal clamp is available in 206 minutes. I said from him, if you forcefully remove it, nothing will happen.

Okay, then the same system, if I can find the photo of the piece when I remove it from my manual gear 206, will I add it to you, will you see it with the same auto?

Yes, this is the picture I was talking about, Arifkemal, after removing the manual gear ball of my old 206, this piece was at the bottom.

[QUOTE = is hakangokdem]

Yes, this is the picture I was talking about, Arifkemal, after removing the manual gear ball of my old 206, this piece was at the bottom.

[/ QUOTE] This is exactly what it is. The interior of the gear knobs is always kept wide. I had previously asked for a gear knob from the internet, besides it came in 3-4 different sizes from the piece in this picture, whichever one fits. it is not a problem if it is not from this piece, though you can thicken the arm with a quality band and put it in place.

[QUOTE = arifkemal] I bought 206 im 307 gear knob. There is a piece in it, the knob is tightly attached to the knob and the knob is attached to it. When I bought it, I removed the knob by turning it to and fro but that white piece remained on the gear lever. Try it with nothing, it is not something to break anyway. [/ QUOTE]

[QUOTE = fearmutlu] [QUOTE = arifkemal] I bought 206 imma 307 gear knob. There is a piece in it, the knob is tightly attached to the knob and the knob is attached to it. When I bought it, I removed the knob by turning it to and fro but that white piece remained on the gear lever. Try it with nothing, it is not something to break anyway. [/ QUOTE] [/ QUOTE] Greetings, 307 gear knob is due to the reason that the hole under the gear knob of the 307 is wider than the 206 gear lever that will enter there. Even if there is no part shown in the picture above, you can wrap and thicken the gearshift lever with tape, then tightly fit the gear knob. aside from these, it looks very sweet. I bought from the star industry site (Cıkmacılar) in Ankara. It already stores in such places according to brands, so you can easily find trades if you go anywhere. He said to me 30 TL. 307 auto. gears zero original 160 tl 206's 130tl .. ask the sponsor of our site peugeotefe.

friends could not be removed by rotating ?? are you sure that it came out that way ??

[QUOTE = ilterunsal] I couldn't take it out by returning friends ?? My friend is now technically with a screw on it. If there is nothing, it can come out by turning or pulling. Oh, he is very hard. you have to try. I turned and hung. I just put it on. Very unlikely to have something different. Do not worry that it will not break a little.

The picture I added shows the compression piece left at the bottom after removing the knob of 206. In these 206s, you can hang tight, do a little right-left, and hang strong, if you don't be careful, you can break that plastic piece. By the way, I do not know the 307 and the gear knob of automatic vehicles . I describe 206 because our brother Arifkemal says the same . Make sure you don't have any screws or setscrew at the bottom, then try to hang it.