307 automatic gear console removal (pictured) - 307

Hello friends, the subject has been opened before, I said to me, as I said, let me share it with the picture. As I was cleaning the car, the evil eye bead hanging in the rearview mirror suddenly fell from the dust tire of the automatic gear. If you do not have the apparatus to remove the cd changer, you can easily pull the jack on the edges with your nails and remove the jack on the back of your watch with a nail screwdriver. Be careful not to break the tongue at the far end, we are removing the sled and lighting of the ashtray. A little more space is required to save the 4 nails around the nickel cap. By removing the two screws under the air conditioner panel and the single screw under the rubber part next to the passenger airbag control button, we expand the area, and with the help of a flat screwdriver, we unscrew the 4 plastic tabs and disassemble the part. the rail and lighting ledsplastic guide We hold 4 screws and disassemble them, look what we look for when looking for such beads.

Elineze health, evening bread money out :)

[QUOTE = Serco05] Elineze health, bread money came out in the evening :)
[/ QUOTE]

this would not be done for such a day, anyway "LOL"

If all this is for the labor bead, get halal :)

[QUOTE = fexzi] If all this labor is for the bead, let it be halal:) [/ QUOTE] It's not

, of course .. it's such a bother because it prevents gear shifts

Congratulations. Good job. Profitable.

It was a really good work. In my 206, there was always money between the gears and it was like a piggy bank & nbsp I couldn't take it off & nbsp;

I was thinking about removing it and covering it because it painted mine with the previous owner and it looked ugly.

His hand was a good and descriptive study of health. Believe me & nbsp; I was thinking about doing this, but I did not dare what would happen to me. Sports driving button has fallen, I made up something but I guess something more beautiful can be done ....

SserkanT inspired by you & nbsp; I have the 2004 model Manuel 307 gasoline car & nbsp; to fix the impulses in the ventilation curtains (Honeycombs blown: D) & nbsp; I removed the console and wanted to share its pictures with you.

1- Remove the gear bellows upwards from the sides with the edge

2- Remove the 2 screws on the right and left under the ashtray opposite the gear

3- After unscrewing these screws, gently pull the gray frame with the control pen from the junction just above the air conditioner buttons (without scratching), it will easily come to you. You can also remove it and clean it in the black pocket where the ashtray is located while removing it.

4- Remove the tape from its socket with 2 U-shaped wires (it may be something like Copper). Carefully remove the cable connectors and then lift the tape aside for mounting

5- Remove the 2 screws on the bottom of the gray frame, including the tape, located above the air conditioner buttons

6- Located at the top of the frame you picked up with the help of a thin screwdriver or knife, pull out the right-most and left-hand buttons from the area buttons (It turns out easily, do not apply excessive force anyway)

7- Now you can disassemble the top screws.

8- Now, carefully remove the frame with the air conditioner combs, you will see the slots where the honeycomb is located & nbsp; already taka We will install them by matching them to the same slots in the previous one.

Now, we can clean the areas, fix the honeycomb and put it back in the reverse order of removal.

Respect everyone ...

Health to your hand. Good job.

Congratulations and nice work.

Does anyone know how we can do the same for 206. my main goal is to eliminate the bad image in the metal that the gear writings wrote. my daughter was using it as a piggy bank for a while. I do not know what profit it threw. Take 3-5 TL.

http://imageshack.us/a/img195/3659/94862904.jpg

Where can we find friends from that sliding back and forth slider here? Can you provide an address or phone? slbn 2013-10-28 15:47:34

nice work, congratulations

I can't see why the pictures are reporting broken link.

Hello guys, I also got a 307 model and I just joined you.

There is no backlight of the digital air conditioner, I will do some cleaning while the bulbs will turn on.

I found a video on Youtube and it was very useful but my The tool is automatic.

I couldn't do how to remove the gearbox (nickel & nbsp; part), it was deleted in the pictures.

Is there any more you can tell?

< / div>

related video link; & nbsp; https://www.youtube.com/watch?v=9GTyI6xbDWU

08.05.2020 17:18	# 2
Serkan
Elineze health, evening bread money out :)

08.05.2020 17:18	# 6
koliva
Congratulations. Good job. Profitable.

08.05.2020 17:18	# 7
fTh206
It was a really good work. In my 206, there was always money between the gears and it was like a piggy bank & nbsp I couldn't take it off & nbsp;

08.05.2020 17:18	# 8
EnSoNiQ
I was thinking about removing it and covering it because it painted mine with the previous owner and it looked ugly.

08.05.2020 17:18	# 9
syz33
His hand was a good and descriptive study of health. Believe me & nbsp; I was thinking about doing this, but I did not dare what would happen to me. Sports driving button has fallen, I made up something but I guess something more beautiful can be done ....

	307 automatic gear console removal (pictured)
• Homepage » PEUGEOT MODIFIED PLATFORM » 307

08.05.2020 17:18	# 1
SserkanT
Hello friends, the subject has been opened before, I said to me, as I said, let me share it with the picture. As I was cleaning the car, the evil eye bead hanging in the rearview mirror suddenly fell from the dust tire of the automatic gear. If you do not have the apparatus to remove the cd changer, you can easily pull the jack on the edges with your nails and remove the jack on the back of your watch with a nail screwdriver. Be careful not to break the tongue at the far end, we are removing the sled and lighting of the ashtray. A little more space is required to save the 4 nails around the nickel cap. By removing the two screws under the air conditioner panel and the single screw under the rubber part next to the passenger airbag control button, we expand the area, and with the help of a flat screwdriver, we unscrew the 4 plastic tabs and disassemble the part. the rail and lighting ledsplastic guide We hold 4 screws and disassemble them, look what we look for when looking for such beads.

08.05.2020 17:18	# 4
fexzi
If all this is for the labor bead, get halal :)

08.05.2020 17:18	# 10
ozzyybo
SserkanT inspired by you & nbsp; I have the 2004 model Manuel 307 gasoline car & nbsp; to fix the impulses in the ventilation curtains (Honeycombs blown: D) & nbsp; I removed the console and wanted to share its pictures with you. 1- Remove the gear bellows upwards from the sides with the edge 2- Remove the 2 screws on the right and left under the ashtray opposite the gear 3- After unscrewing these screws, gently pull the gray frame with the control pen from the junction just above the air conditioner buttons (without scratching), it will easily come to you. You can also remove it and clean it in the black pocket where the ashtray is located while removing it. 4- Remove the tape from its socket with 2 U-shaped wires (it may be something like Copper). Carefully remove the cable connectors and then lift the tape aside for mounting 5- Remove the 2 screws on the bottom of the gray frame, including the tape, located above the air conditioner buttons 6- Located at the top of the frame you picked up with the help of a thin screwdriver or knife, pull out the right-most and left-hand buttons from the area buttons (It turns out easily, do not apply excessive force anyway) 7- Now you can disassemble the top screws. 8- Now, carefully remove the frame with the air conditioner combs, you will see the slots where the honeycomb is located & nbsp; already taka We will install them by matching them to the same slots in the previous one. Now, we can clean the areas, fix the honeycomb and put it back in the reverse order of removal. Respect everyone ...

08.05.2020 17:18	# 13
arachnid
Does anyone know how we can do the same for 206. my main goal is to eliminate the bad image in the metal that the gear writings wrote. my daughter was using it as a piggy bank for a while. I do not know what profit it threw. Take 3-5 TL.

08.05.2020 17:18	# 14
slbn
http://imageshack.us/a/img195/3659/94862904.jpg Where can we find friends from that sliding back and forth slider here? Can you provide an address or phone? slbn 2013-10-28 15:47:34

08.05.2020 17:18	# 17
leprokan23
I can't see why the pictures are reporting broken link.

08.05.2020 17:18	# 18
01MRT
Hello guys, I also got a 307 model and I just joined you. There is no backlight of the digital air conditioner, I will do some cleaning while the bulbs will turn on. I found a video on Youtube and it was very useful but my The tool is automatic. I couldn't do how to remove the gearbox (nickel & nbsp; part), it was deleted in the pictures. Is there any more you can tell? < / div> related video link; & nbsp; https://www.youtube.com/watch?v=9GTyI6xbDWU