|
|
|
|
307 armrests received and attached (Pictured) |
| • Homepage » PEUGEOT MODIFIED PLATFORM » 307 | |
| 08.05.2020 17:46 | # 1 |
 qqyyxx |
|
|
|
|
| 08.05.2020 17:46 | # 2 |
 samet206 |
|
|
One of the reminiscences appears, but it is nice to use it with a nice bye ... |
|
| 08.05.2020 17:46 | # 3 |
| qqyyxx |
|
|
Clicking on the link below, a single picture appears, but clicking the arrows on the picture, going left and right and reaching the other photos. at least my pc is too.
|
|
| 08.05.2020 17:46 | # 4 |
 error |
|
|
nice xxyyqq I like this model, I wonder how it seems to me that the height is a bit high, does it also prevent the hand brake?     |
|
| 08.05.2020 17:46 | # 5 |
| qqyyxx |
|
|
health for the arrangement, the arm rests a little high when the seat height is at the top, but not too low, it would be better if the armrest was made a little lower. It does not cause any trouble to the hand firen. It is easily reached from both sides of the armrest.
|
|
| 08.05.2020 17:46 | # 6 |
 dream |
|
|
Good bye, it is comfortable during the journey.
|
|
| 08.05.2020 17:46 | # 7 |
 _PunisheR_ |
|
|
wow it's nice i need 206 or something original
|
|
| 08.05.2020 17:46 | # 8 |
| error |
|
|
Well, it seems like it will stay a little high for me, but if you don't have both armrests and cc on the long road, the road doesn't end, are we drilling screwing for mounting xxyyqq ?? |
|
| 08.05.2020 17:46 | # 9 |
| qqyyxx |
|
|
It is fixed with two screws. In the recessed part, the screw, which fixes the center console to the vehicle, is removed from it and a slightly longer screw is attached. any hole you can see when the armrest is removed, etc. no.
|
|
| 08.05.2020 17:46 | # 10 |
 SDYMZ |
|
|
good health by hand |
|
| 08.05.2020 17:46 | # 11 |
| qqyyxx |
|
|
http://www.sesiotomotiv.com/?/x/9/717/peugeot-307-uyumlu-kolcak.html I found this product by chance. It looks like the same product that I bought for 150 TL from the male. I would recommend the price affordable.
|
|
| 08.05.2020 17:46 | # 12 |
 elsoberano |
|
|
[QUOTE = qqyyxx] http://www.sesiotomotiv.com/?/x/9/717/peugeot-307- compatible-kolcak.html I found this product by chance. It looks like the same product that I bought for 150 TL from the male. I would recommend the price affordable. [/ QUOTE] If the product is the same, the price should be quite good.
|
|
| 08.05.2020 17:46 | # 13 |
| qqyyxx |
|
|
If you apparently want to pay the same PTT, then return it if it is not the same.
|
|
| 08.05.2020 17:46 | # 14 |
| error |
|
|
I sent a message, like a detailed picture.
|
|
| 08.05.2020 17:46 | # 15 |
| error |
|
|
a political answer Hello Abdullah bey, armrests are sent to the market by the same factory only personally. So the factory is always the same. The armrest is the same, the height ratio is the same, these are already prepared as standard, the armrest you see here is designed according to P-307. In gray and black, this It does not come out of the model. There is no injury, it is connected to the console, it does not require a master. Easy to come. |
|
| 08.05.2020 17:46 | # 16 |
 kivanc |
|
|
Armrest is very important :) Good luck ..
|
|
| 08.05.2020 17:46 | # 17 |
 pierson |
|
|
I also want to have my car put on, but ... the car is already small ... if it has 206, can it throw a picture?
|
|
| 08.05.2020 17:46 | # 18 |
| qqyyxx |
|
|
I searched a lot but the foot of any of them including the advertisements you mentioned It did not seem to be mounted without performing piercing. I could not get healthy information from the sellers. I did not want to leave the heat
|
|