307 antipollution fault warning - 307

My 307 1.6 petrol + lpg car got an antipollution fault warning and I got cold driving and I am waiting for the advice from friends who can offer a definitive solution to this.

The definitive solution is to sell the car, and don't get that warning again, hodja.

mine is on fire: D

the source of the problem is due to the afr setting. for our magnificent masters auto calibrate and send.

There is a brother named murat sunflower in Istanbul. I will make an appointment with him sometime and arrange it with wide band afr. then I will send that lamp to not burn.

This fault was always giving me a break, so I just stopped using the gas, so I used the tool. it was like the fault went away, but after 5 minutes it failed again, it continued with shake and white smoke, it was reconnected to the computer. how did I go, what are you, what is the problem, what is the expression, the white smoke behind me, the car is shaking constantly. The work has been separated, taped back, and the problem has disappeared. It is very interesting that the fault that has been going on for about 3 years has come from here and there has been no problem or warning for 6 months. I hope this can help you.

Now, I am giving the exact solution to this problem, hopefully, for the sake of everyone, it will be useful for everyone with this problem to read.

Who do I list my articles?

Now if your 307 is burning the Antipollution staple while working with lpg

If it flashes spontaneously every once in a while

or if it burns fuel from the same place and goes out when it gets from another place

Vs.vs First, this warning is definitely a dirt warning but there is no such thing as everybody in the car burns the gas you find, as everybody burns the cars. It has come to my mind, I tried and solved, you will benefit.

Get a nice gasoline in the car, 50km just use it on gasoline without touching lpg.

Then go to a pejo service that has pp2000 i can connect to 307 with the computer. But I want to delete the fuel map of the vehicle. I want you to reset the fuel map of the vehicle completely. You do not get the vehicle to gas again, but only 4 5 km is enough to use it in all the gears. The vehicle will not be burned. We continue by saying that 85% will not burn. After 4 5 km, the vehicle will have created its own map. In this way, you go to LPG. You will delete all the settings and tell Auto calibration. The program makes you auto calibrate and you start to use the vehicle in LPG. The event is over. Never fail, 10% probability of this light is burned to a combination of light.

It's been a bit long, but after I got 307 of this problem, I got at least 5 people I met. We did the same things and removed the problem. nothing, you have a new fuel map at most. This is not a bad thing.

08.05.2020 19:35	# 1
yemre55
My 307 1.6 petrol + lpg car got an antipollution fault warning and I got cold driving and I am waiting for the advice from friends who can offer a definitive solution to this.

08.05.2020 19:35	# 2
KILIC
The definitive solution is to sell the car, and don't get that warning again, hodja.

08.05.2020 19:35	# 4
sirius
This fault was always giving me a break, so I just stopped using the gas, so I used the tool. it was like the fault went away, but after 5 minutes it failed again, it continued with shake and white smoke, it was reconnected to the computer. how did I go, what are you, what is the problem, what is the expression, the white smoke behind me, the car is shaking constantly. The work has been separated, taped back, and the problem has disappeared. It is very interesting that the fault that has been going on for about 3 years has come from here and there has been no problem or warning for 6 months. I hope this can help you.

08.05.2020 19:35	# 5
oguz41
Now, I am giving the exact solution to this problem, hopefully, for the sake of everyone, it will be useful for everyone with this problem to read. Who do I list my articles? Now if your 307 is burning the Antipollution staple while working with lpg If it flashes spontaneously every once in a while or if it burns fuel from the same place and goes out when it gets from another place Vs.vs First, this warning is definitely a dirt warning but there is no such thing as everybody in the car burns the gas you find, as everybody burns the cars. It has come to my mind, I tried and solved, you will benefit. Get a nice gasoline in the car, 50km just use it on gasoline without touching lpg. Then go to a pejo service that has pp2000 i can connect to 307 with the computer. But I want to delete the fuel map of the vehicle. I want you to reset the fuel map of the vehicle completely. You do not get the vehicle to gas again, but only 4 5 km is enough to use it in all the gears. The vehicle will not be burned. We continue by saying that 85% will not burn. After 4 5 km, the vehicle will have created its own map. In this way, you go to LPG. You will delete all the settings and tell Auto calibration. The program makes you auto calibrate and you start to use the vehicle in LPG. The event is over. Never fail, 10% probability of this light is burned to a combination of light. It's been a bit long, but after I got 307 of this problem, I got at least 5 people I met. We did the same things and removed the problem. nothing, you have a new fuel map at most. This is not a bad thing.

	307 antipollution fault warning
• Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307

08.05.2020 19:35	# 3
fætih
mine is on fire: D the source of the problem is due to the afr setting. for our magnificent masters auto calibrate and send. There is a brother named murat sunflower in Istanbul. I will make an appointment with him sometime and arrange it with wide band afr. then I will send that lamp to not burn.