Peugeot Forums - Peugeot Fan Club

307 Airbag Warning

Homepage » PEUGEOT MODELS (FAULTS AND SOLUTIONS) » 307
08.05.2020 21:21 # 1
tykz
The airbag lamp of my 2006 307 vehicle is on. Two cables were cut from the socket under the front right seat. When I look at the seat belt, a resistance etc. I did not see the front torpedo does not appear to have a coating. Why could this be? How to extinguish? Why did they cut the cables? I would be glad if those with the information answered.
08.05.2020 21:21 # 2
sonerkyl
Hello, two options are likely, one airbag wrap is the second on the steering wheel and the most likely is the disconnection of the armpits. I guess they tried to fix it, but they cut it out because they couldn't do it. My priority advice is if you look at the error codes with the original software, which airbag gives the error. The problem with the seat is that the airbag installation cables are at the bottom of the seat slide rails, causing damage due to moving back and forth, either cutting the cable or causing a short circuit.
08.05.2020 21:21 # 3
tykz
[QUOTE = sonerkyl] Hello there are two options, one of which is probably the second in the steering wheel, the most likely is the disconnection of the armpits. I guess they tried to fix it, but they cut it out because they couldn't do it. My priority advice is if you look at the error codes with the original software, which airbag gives the error. The problem with the seat is that when the airbag installation cables are at the bottom of the seat slide rails, damage occurs due to moving back and forth, either cutting the cable or causing a short circuit. [/ QUOTE]

The cable under the passenger seat was cut by someone who did not break due to damage. They probably say that the lamp was chronic, not because it was turned on before, so they tried to extinguish it because they cut the cable as you said. But later, they did not understand why they did not reconnect. Does the airbag work or not when the cable is cut or when this lamp is on, in any case? A resistance etc. when I look at the seat belts. I could not see. There is no tape.
08.05.2020 21:21 # 4
omerb
If the airbag lamp is on, it means that it is disabled. I don't think an airbag will open in any accident. More precisely, if the airbag has exploded in your vehicle, I think you have it checked first. Is the belt resistance not already placed to mislead the airbags? I don't think you have an airbag. Go to a nice airbag. Have it checked. Life safety is a must. Take your precaution. I think this problem does not happen to everyone. There may be no information from the forum. Airbag repairman of the solution.
Maşallah, we are not on fraud. What are the guys doing to make a profit of a few thousand TL? Don't even get out of your vehicle, they wear a chest. You can't understand. You look for repair in the chest. Maybe the chest has changed completely.
omerb 2019-11-11 23:49:42
Peugeot Forums - Peugeot Fan Club © 2025
“The most auspicious of people, it is people who are useful.”